RadioBanter

RadioBanter (https://www.radiobanter.com/)
-   Shortwave (https://www.radiobanter.com/shortwave/)
-   -   860 AM (https://www.radiobanter.com/shortwave/139491-re-860-am.html)

[email protected] December 19th 08 07:39 AM

860 AM
 
On Dec 18, 2:30*pm, "David Eduardo" wrote:
"BCBlazysusan" wrote in message

...
On Dec 18, 4:40 am, dxAce wrote:

Whoa! When mentioning QSL, one must always add (verie, for those in
Glendale)!


It also might be a good idea to do this when mentioning QTH (location, for
those
in Glendale) as well.


OK - when you say "verie" that means? I always thought that what I
sent to stations was called a verification report and then they in
turn send a qsl card or letter. Correct? No? FWIW my location is
Cincinnati,Oh.

Among MW DXers, one sends a reception report and receives a verification or
confirmation of reception from the station.

Station staffs seldom know the "Q" codes, and most would have no idea what a
"QSL" card is. Since most stations have contract engineers, not staff
engineers, its likely that a verification would come from someone in the
office... the manager, PD, office manager, etc., and they probably don't
know much about DXing in general... including the term "DXing."

Among themselves, AM DXers have called any confirmation of reception a
"verie" for the last 60 or 70 years. But at the station level, this term is
as unknown as QSL or QTH or DX.

For these reasons, reporting to anything except the big 50 kw clear channel
stations should use lay terms to the tone of "I heard your station... here
is what I heard... If this is correct, I'd value a verification from you
that I indeed heard your station."

From where I sit, our local AM, a 50 kw fulltime facility, only gets maybe 2
to 3 reception reports a year. Because our DOE is a ham, he knows what to do
with them. But many stations are not familiar with AM DXing any more. In
fact, some think that distant reception shows them operating outside
licensed values, and reports frighten them!


Glendale. Those Armenians know how to cook, especially BBQ.

RHF December 19th 08 09:39 AM

860 AM
 
On Dec 18, 11:39*pm, wrote:
On Dec 18, 2:30*pm, "David Eduardo" wrote:



"BCBlazysusan" wrote in message


....
On Dec 18, 4:40 am, dxAce wrote:


Whoa! When mentioning QSL, one must always add (verie, for those in
Glendale)!


It also might be a good idea to do this when mentioning QTH (location, for
those
in Glendale) as well.


OK - when you say "verie" that means? I always thought that what I
sent to stations was called a verification report and then they in
turn send a qsl card or letter. Correct? No? FWIW my location is
Cincinnati,Oh.


Among MW DXers, one sends a reception report and receives a verification or
confirmation of reception from the station.


Station staffs seldom know the "Q" codes, and most would have no idea what a
"QSL" card is. Since most stations have contract engineers, not staff
engineers, its likely that a verification would come from someone in the
office... the manager, PD, office manager, etc., and they probably don't
know much about DXing in general... including the term "DXing."


Among themselves, AM DXers have called any confirmation of reception a
"verie" for the last 60 or 70 years. But at the station level, this term is
as unknown as QSL or QTH or DX.


For these reasons, reporting to anything except the big 50 kw clear channel
stations should use lay terms to the tone of "I heard your station... here
is what I heard... If this is correct, I'd value a verification from you
that I indeed heard your station."


From where I sit, our local AM, a 50 kw fulltime facility, only gets maybe 2
to 3 reception reports a year. Because our DOE is a ham, he knows what to do
with them. But many stations are not familiar with AM DXing any more. In
fact, some think that distant reception shows them operating outside
licensed values, and reports frighten them!


- Glendale. Those Armenians know how to cook, especially BBQ.

Some people in Texas and the South West
might beg to differ with you . . .

There 'be' Bar-B-Que and The 'Be' BBQ ;-P

Dave[_18_] December 19th 08 02:08 PM

860 AM
 
RHF wrote:
On Dec 18, 11:39 pm, wrote:



- Glendale. Those Armenians know how to cook, especially BBQ.

Some people in Texas and the South West
might beg to differ with you . . .

There 'be' Bar-B-Que and The 'Be' BBQ ;-P
.

Glendale, CA is in the Southwest.

RHF December 21st 08 08:44 AM

(OT) : PONG Dave - Glendale, CA Ain't . . .
 
On Dec 19, 6:08*am, Dave wrote:
RHF wrote:
On Dec 18, 11:39 pm, wrote:


- Glendale. Those Armenians know how to cook, especially BBQ.


Some people in Texas and the South West
might beg to differ with you . . .


There 'be' Bar-B-Que and The 'Be' BBQ ;-P
*.


- Glendale, CA is in the Southwest.

Dave,


All times are GMT +1. The time now is 05:56 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
RadioBanter.com