In article telamon_spamshield-D1F784.22295501062009
@newsclstr03.news.prodigy.net,
lid says...
In article ,
BDK wrote:

In article telamon_spamshield-96197F.20293701062009
@newsclstr02.news.prodigy.com,
lid says...
In article ,
BDK wrote:

In article telamon_spamshield-A12663.19530001062009
@newsclstr02.news.prodigy.com,
lid says...
In article ,
BDK wrote:

In article 88705e78-1c19-4584-b310-c7a777b07e28@
37g2000yqp.googlegroups.com, says....
On May 30, 1:01*am, BDK wrote:
In article ,
says...





"Telamon" wrote in
message

odig
y.ne
t...
In article ,
John Barnard wrote:

SNIP

If he's gunning for respect, he's going about it in a
strange
way. I
can
respect someone who screws up and admits to getting it
wrong.

SNIP

Respect is something you don't understand.

The only thing you are capable of is projecting your
perversities
upon
others. Post your stupid crap someplace else.

Ah, I see Telanutjob is back to his old self.....

Watch out, he'll get angry and call you gay. Or just a pervert.
--

BDK..
Leader of the non-existant paid shills.
Non Jew Jew Club founding member.
Former number one Kook Magnet, passed to Iarnrod.

Top Posters for this Month : Mayo 2009

406

298

287 RHF

281

131

130

124

88

86

67
.


Telemundoh's been a busy kook!

BDK is busy posting BS as usual. 454 BS posts for May.




But I'm not nearly as bitter and angry as you are, Telemundoh.

I'm just having fun. At your expense.

I didn't know someone could have enough internal crap to spew for 1,813
BS posts for May 2009. You certainly are full of it.


Do you think I get charged by the post or something?

No, I think you get a "perverse charge" out of posting BS.

You kooktards and your 911 nonsense, your evil joo stuff, and of course,
your Obama BC insanity, keep me laughing while I work on some stuff. I'm
currently putting together some scanner pre amps, and taking a laugh
break makes the job less monotonous.

Sure thing Kookaburra. You are such a prolific Usenet Kook I doubt you
have time for anything else.




LOL, I guess I'm not as feeble minded as you are. I solder a few joints,
post, solder a few more, watch TV, etc. Not all that hard to, for me at
least. I've been putting stuff together a long long time now, and can
plug in parts and solder with the best of them.

I guess I don't waste as much time as you do, since I don't think about
ultra right wing politics constantly while assembling those preamps.
Tomorrow night, I'll be aligning my NRD-515, and posting at the same
time.

Nothing you do or say would surprise me, unless you say something non
ultra right wing, with regards to politics. You make a very conservative
friend of mine look like a member of the green party. You're totally
over the top.

But always entertaining. Especially when you're ****ed, like you are
most of the time.


Doesn't being ****ed all the time get really old?

--

BDK..
Leader of the nonexistent paid shills.
Non Jew Jew Club founding member.
Former number one Kook Magnet, passed to Iarnrod.

In article ,
BDK wrote:

Sure thing Kookaburra. You are such a prolific Usenet Kook I doubt you
have time for anything else.




LOL, I guess I'm not as feeble minded as you are. I solder a few joints,
post, solder a few more, watch TV, etc. Not all that hard to, for me at
least. I've been putting stuff together a long long time now, and can
plug in parts and solder with the best of them.

You smoke a few joints and then watch TV and make 1,813 garbage posts in
May. Tough life you got going there.

--
Telamon
Ventura, California

In article telamon_spamshield-D5B994.20064402062009
@newsclstr03.news.prodigy.net,
lid says...
In article ,
BDK wrote:

Sure thing Kookaburra. You are such a prolific Usenet Kook I doubt you
have time for anything else.




LOL, I guess I'm not as feeble minded as you are. I solder a few joints,
post, solder a few more, watch TV, etc. Not all that hard to, for me at
least. I've been putting stuff together a long long time now, and can
plug in parts and solder with the best of them.

You smoke a few joints and then watch TV and make 1,813 garbage posts in
May. Tough life you got going there.

LOL, good one. Maybe you can crack a smile one of these days.

My life could be a lot worse, like yours seems to be, judging by your
politics and general demeanor.

--

BDK..
Leader of the nonexistent paid shills.
Non Jew Jew Club founding member.
Former number one Kook Magnet, passed to Iarnrod.

In article ,
BDK wrote:

In article telamon_spamshield-D5B994.20064402062009
@newsclstr03.news.prodigy.net,
lid says...
In article ,
BDK wrote:

Sure thing Kookaburra. You are such a prolific Usenet Kook I doubt you
have time for anything else.




LOL, I guess I'm not as feeble minded as you are. I solder a few joints,
post, solder a few more, watch TV, etc. Not all that hard to, for me at
least. I've been putting stuff together a long long time now, and can
plug in parts and solder with the best of them.

You smoke a few joints and then watch TV and make 1,813 garbage posts in
May. Tough life you got going there.

LOL, good one. Maybe you can crack a smile one of these days.

My life could be a lot worse, like yours seems to be, judging by your
politics and general demeanor.

My life is OK and it probably is better than what you are up to doing
most of the time.

--
Telamon
Ventura, California

Telamon wrote:
In article ,
BDK wrote:

In article telamon_spamshield-D5B994.20064402062009
@newsclstr03.news.prodigy.net,
lid says...
In article ,
BDK wrote:

Sure thing Kookaburra. You are such a prolific Usenet Kook I doubt you
have time for anything else.



LOL, I guess I'm not as feeble minded as you are. I solder a few joints,
post, solder a few more, watch TV, etc. Not all that hard to, for me at
least. I've been putting stuff together a long long time now, and can
plug in parts and solder with the best of them.
You smoke a few joints and then watch TV and make 1,813 garbage posts in
May. Tough life you got going there.
LOL, good one. Maybe you can crack a smile one of these days.

My life could be a lot worse, like yours seems to be, judging by your
politics and general demeanor.

My life is OK and it probably is better than what you are up to doing
most of the time.


How can that be since your persecution is up-and-coming?

In article ,
John Barnard wrote:

Telamon wrote:
In article ,
BDK wrote:

In article telamon_spamshield-D5B994.20064402062009
@newsclstr03.news.prodigy.net,
lid says...
In article ,
BDK wrote:

Sure thing Kookaburra. You are such a prolific Usenet Kook I doubt you
have time for anything else.



LOL, I guess I'm not as feeble minded as you are. I solder a few joints,
post, solder a few more, watch TV, etc. Not all that hard to, for me at
least. I've been putting stuff together a long long time now, and can
plug in parts and solder with the best of them.
You smoke a few joints and then watch TV and make 1,813 garbage posts in
May. Tough life you got going there.
LOL, good one. Maybe you can crack a smile one of these days.

My life could be a lot worse, like yours seems to be, judging by your
politics and general demeanor.

My life is OK and it probably is better than what you are up to doing
most of the time.


How can that be since your persecution is up-and-coming?

Why do you expect to be persecuted? What have you done now hoser?

--
Telamon
Ventura, California

Telamon wrote:
In article ,
BDK wrote:

Sure thing Kookaburra. You are such a prolific Usenet Kook I doubt you
have time for anything else.



LOL, I guess I'm not as feeble minded as you are. I solder a few joints,
post, solder a few more, watch TV, etc. Not all that hard to, for me at
least. I've been putting stuff together a long long time now, and can
plug in parts and solder with the best of them.

You smoke a few joints and then watch TV and make 1,813 garbage posts in
May. Tough life you got going there.


Sounds like pretty advanced stuff, if it still has leads and doesn't
need an oven.

In article ,
says...
Telamon wrote:
In article ,
BDK wrote:

Sure thing Kookaburra. You are such a prolific Usenet Kook I doubt you
have time for anything else.



LOL, I guess I'm not as feeble minded as you are. I solder a few joints,
post, solder a few more, watch TV, etc. Not all that hard to, for me at
least. I've been putting stuff together a long long time now, and can
plug in parts and solder with the best of them.

You smoke a few joints and then watch TV and make 1,813 garbage posts in
May. Tough life you got going there.


Sounds like pretty advanced stuff, if it still has leads and doesn't
need an oven.



You don't need an oven to do most SMD stuff, just steady hands and a
tiny iron. A vacuum desoldering station makes it easy to pull parts.
The preamps I did were a mix of parts, a little SM pc board and a
bandpass filter made the old fashioned way. Even wound a couple of
coils.

--

BDK..
Leader of the nonexistent paid shills.
Non Jew Jew Club founding member.
Former number one Kook Magnet, passed to Iarnrod.

BDK wrote:
In article ,
says...
Telamon wrote:
In article ,
BDK wrote:

Sure thing Kookaburra. You are such a prolific Usenet Kook I doubt you
have time for anything else.


LOL, I guess I'm not as feeble minded as you are. I solder a few joints,
post, solder a few more, watch TV, etc. Not all that hard to, for me at
least. I've been putting stuff together a long long time now, and can
plug in parts and solder with the best of them.
You smoke a few joints and then watch TV and make 1,813 garbage posts in
May. Tough life you got going there.

Sounds like pretty advanced stuff, if it still has leads and doesn't
need an oven.



You don't need an oven to do most SMD stuff, just steady hands and a
tiny iron. A vacuum desoldering station makes it easy to pull parts.
The preamps I did were a mix of parts, a little SM pc board and a
bandpass filter made the old fashioned way. Even wound a couple of
coils.


As my hands get steadier my vision gets worse. I use Mageyes and a
pointy Hakko type soldering station for discrete SMT component changing
(4 "lead" FETs usually).

If I was building a new board from scratch I'd use paste and hot air
of some kind.

In article ,
says...
BDK wrote:
In article ,
says...
Telamon wrote:
In article ,
BDK wrote:

Sure thing Kookaburra. You are such a prolific Usenet Kook I doubt you
have time for anything else.


LOL, I guess I'm not as feeble minded as you are. I solder a few joints,
post, solder a few more, watch TV, etc. Not all that hard to, for me at
least. I've been putting stuff together a long long time now, and can
plug in parts and solder with the best of them.
You smoke a few joints and then watch TV and make 1,813 garbage posts in
May. Tough life you got going there.

Sounds like pretty advanced stuff, if it still has leads and doesn't
need an oven.



You don't need an oven to do most SMD stuff, just steady hands and a
tiny iron. A vacuum desoldering station makes it easy to pull parts.
The preamps I did were a mix of parts, a little SM pc board and a
bandpass filter made the old fashioned way. Even wound a couple of
coils.


As my hands get steadier my vision gets worse. I use Mageyes and a
pointy Hakko type soldering station for discrete SMT component changing
(4 "lead" FETs usually).

I'm at the point where I have to take off my glasses and get really
close. Reading glasses help a little, sometimes, but I always end up
taking them off and just getting really close. I can't remember the
brand of the tiny soldering irons I bought at a local electronics store
that was closing for an insane price a few years ago. There were all
kinds of tips that came with it, and the owner of the store tossed in
the remaining ones he had, as I had spent a lot of money there over the
years. Came in very useful for swapping out a ton of caps on the Kenwood
TS-850 I got super cheap a while back. Very nice receiver.


If I was building a new board from scratch I'd use paste and hot air
of some kind.


Well, so far, I haven't done any scratch stuff involving SM. Most of the
time, the board is bought from some place, like FAR, and I put it
together, sometimes mod it too. I have a couple of friends who have
vision issues and so I am the one who gets to do all their soldering and
PC assembly. I get paid sometimes, sometimes it's trade for something,
but it's usually fun.


--

BDK..
Leader of the nonexistent paid shills.
Non Jew Jew Club founding member.
Former number one Kook Magnet, passed to Iarnrod.