On Sep 25, 8:31*pm, nurk_fred2000 wrote:
On Sep 25, 2:53*am, Bob Dobbs wrote:

nurk_fred2000 wrote:

***cu...maybe you can do all the Distinguished Trolls a big fat favor
and find the biggest rustiest drill bit you have, lube the **** out of
it...jam it into the highest speed drill you gots, and then go find
Ph.d dufus down in them thar parts of B%tt Ph_k'n Alabamar, and see if
he'll "bend over the couch"...I'll even by the b%tt grease...Open WIDE
Ph.Dufus!!...*pickin and grinnin Afro Style*

Sounds like the CBer known as ****head fred from Hutchinson Minnesota.

--

Operator Bob
Echo Charlie 42

***good ol bobber dobber and his trusty bong...weekends here
dobber...load up on cheap swill, get yourself a five finger discount
at the local speedy thrift mart, and go mud boggin...by the by can we
count on you to be at the Bangkok Arrest Anniversary *Bash over at rec
dot knives on Jan 8th...the Distinguished Trolls will be soooooo
thrilled to see you there...*grin*

Ole' Bonger Bob isn't even worthy enough to enjoy
the bash IMO.....on second thought.....he may.

I feel that him and The Bankok Banger may end
up as "bestest buddies-roes".....their pyschological
makeup IMO is about the same.

But Fred, I fear you are going to "water down" the
very important day of The Bash by just inviting any
num-nut....unless of course you are trolling for future
"tools"....and in that case....you will find a few here,
no doubt. ;-D

On Sep 24, 9:04*pm, nurk_fred2000 wrote:
On Sep 24, 3:18*pm, wrote:





Looka here, Dudette.I know a very nice married Lady who lives in
Texarkana,Texas.Dontchoo be badmoufin Texarkana,Texas and
Texarkana,Arkansas,,, duz you hear me!?!

I done fixed my Milwaukee electric drill.I owns a few udder Milwaukee
electric drills too.One of them is a Milwaukee hammer drill and the
udder one is a Milwaukee Hole Hog electric drill.It has a gear shift
lever on it.Not even Hulk Hogan can hold on to that Milwaukee Hole Hog
electric drill if it hangs up.It would beat the crap out of anybody!

I done gots me a couple of super bright idees when I starts workin on my
house steep roof top.I am going to tie some loops in one of my lonnnng
ropes and sling the rope over my roof top, I have some big thick pieces
of square concrete, I will lay them on the ground, one of them in front
of my house, the udder one ats the back of my house, I will tie the rope
around the concrete.My big wide Klein (Klein Tools company) safety belt
I will be ahh wearing, I can hook onto the rope loops as I move up and
down on my roof top, so I can't fall off of my roof top even if I want
to.My udder super bright idee, I am going to screw a board to anudder
board abouts a foot wide and six foots long, I have some thick rubber
mats, I can cut some strips of that rubber and attatch them to the
bottom edges of the board.Thataway I will be standing level when I works
on the sides of my roof top up thar.
cuhulin * *

***cu...maybe you can do all the Distinguished Trolls a big fat favor
and find the biggest rustiest drill bit you have, lube the **** out of
it...jam it into the highest speed drill you gots, and then go find
Ph.d dufus down in them thar parts of B%tt Ph_k'n Alabamar, and see if
he'll "bend over the couch"...I'll even by the b%tt grease...Open WIDE
Ph.Dufus!!...*pickin and grinnin Afro Style*- Hide quoted text -

- Show quoted text -

You have a way with words Fred. ;-)

On Sep 22, 6:10*am, LarbGai wrote:
****** What happened to new Ham Brian and his Grundig Aviator G6
(Special Buzz Aldrin LIMITED Edition)?

Perhaps he has disappeared up his own fundimental oriface.

Just let me explain something to you Ole' Mighty
Larb so you don't give "someones" in here reason
to pick apart your posts in response to a "ham."

Brian isn't/wasn't/nor will ever be a 'ham' so too speak. He is/ or
was trying to make people think
he was/is a SWL (Short Wave Listener.)

Not that there is anything wrong with just
being a SWL....I could have passed the HAM test
fifty times over, but I don't feel the need (at least
for now) to TX (meaning Transmit- meaning key up
and talk to someone.)

I just like listening as most do in this group but
there are some HAMS in here also. Just saying.

On Sep 26, 9:36*am, Bob Dobbs wrote:
Bushcraftgregg wrote:

I just like listening as most do in this group

It's ostensibly a listeners group, so?

but
there are some HAMS in here also.

Why even mention it
unless you are so convinced that your dream of being a licensed amateur
someday will never come to pass due to your laziness, and it's easier to
try and justify that eventuality in a sour grapes manner.

--

Operator Bob
Echo Charlie 42

***Bob Dobb wrote...
Why even mention it
unless you are so convinced that your dream of being a licensed
amateur
someday will never come to pass due to your laziness, and it's easier
to
try and justify that eventuality in a sour grapes manner.

***Nurk_Fred writes...
Why are YOU mentioning it dobber...you should be the LAST on this MB
to even discuss laziness; the dopers on this MB have taken that skill
set to an all time high...of course you already knew that dobber...*sh
%t eatin grin; afro style*

On Sep 30, 8:16*am, Toxic wrote:
On Tue, 29 Sep 2009 22:28:29 -0700, nurk_fred2000 wrote:
*sh%t eatin grin; afro style*

Dat be a niggah eatin' waudymelin?

***coll-yard greens, b%tt ph_kin chittlins, possum, and black eyed
peas...c'mon cuhulin...dinna's served...:-)

On Sep 26, 12:36*pm, Bob Dobbs wrote:
Bushcraftgregg wrote:

I just like listening as most do in this group

It's ostensibly a listeners group, so?

but
there are some HAMS in here also.

Why even mention it
unless you are so convinced that your dream of being a licensed amateur
someday will never come to pass due to your laziness, and it's easier to
try and justify that eventuality in a sour grapes manner.

--
Nothing you said even made sense. rolling my eyes

Maybe take another hit Bob.

On Oct 1, 6:34*am, Bob Dobbs wrote:
Bushcraftgregg wrote:

Nothing you said even made sense. rolling my eyes

Nothing's ever going to make any sense
to your eye rolling slot machine head.

Maybe take another hit Bob.

I'll toke to that!

--
Of course you will, that's why I said it. sigh

On Oct 1, 5:39*am, Bushcraftgregg wrote:
On Oct 1, 6:34*am, Bob Dobbs wrote: Bushcraftgregg wrote:

Nothing you said even made sense. rolling my eyes

Nothing's ever going to make any sense
to your eye rolling slot machine head.

Maybe take another hit Bob.

I'll toke to that!

--

Of course you will, that's why I said it. sigh

***Bob Dob, you related any way to Doobie Dave...?...you know, the
buffoon that brags about getting toasted and then going out to build
radio and tv towers without blueprints or plans...?...smoke another
bowl dobber...you dopers really seem to like your weed...is your
neighbor a Cop also...?...:-)

On Oct 1, 12:39*pm, nurk_fred2000 wrote:
On Oct 1, 5:39*am, Bushcraftgregg wrote:

On Oct 1, 6:34*am, Bob Dobbs wrote: Bushcraftgregg wrote:

Nothing you said even made sense. rolling my eyes

Nothing's ever going to make any sense
to your eye rolling slot machine head.

Maybe take another hit Bob.

I'll toke to that!

--

Of course you will, that's why I said it. sigh

***Bob Dob, you related any way to Doobie Dave...?...you know, the
buffoon that brags about getting toasted and then going out to build
radio and tv towers without blueprints or plans...?...smoke another
bowl dobber...you dopers really seem to like your weed...is your
neighbor a Cop also...?...:-)

Yeah Dave builds them and the
ELF takes 'em down.
http://www.rbr.com/radio/16893.html
http://www.enterprisenewspapers.com/...09/0/ETPZONELT

~ RHF wrote:


Yeah Dave builds them and the
ELF takes 'em down.
http://www.rbr.com/radio/16893.html
http://www.enterprisenewspapers.com/...09/0/ETPZONELT
.
I do not build AM directionals without plans. Solid state LPTV is
pretty easy as there are are no stages that aren't broadbanded. There
is very little tuning, even with a tube amp. AM directionals have
"constants" that are determined by a PE or some such.