Both manuals on their way! Enjoy!

"wgregt" wrote in message
...

Hey guys-
Complete & total SW rookie here. Today I was given a rarely-used GE
shortwave radio model 7-2990A today from a neighbor who was cleaning
out his mother-in-law's house to sell. It's in perfect shape and I'm
excited to have it.

I know nothing about this radio, or how to operate it, or SW at all.
I'm all over the www reading about SW in general, but I would love to
get a copy (or a PDF?) of the original manual so I can figure out the
knobs, etc. Would also love to know more about this radio's shortfalls,
things to improve, etc.

I'm in SoCal. You can reach me directly (probably the best way) at:
forsaleinfl at aol dot com

Thanks for any info/tips/advice!

-greg




--
wgregt

Thanks for them both! I didn't even know there were two manuals.

Now...anyone know of a DIY fix parts/instruction for the tuning knob flaw, or maybe even a shop/someone who can fix it permanently?

I can fix that radio for you! I fixed mine. It takes some time and work BUT it can be done. Contact me!

Ernie

HEY! Still got that radio fix for the tuning issue?

-greg

On Monday, January 11, 2010 at 11:46:35 PM UTC-5, wgregt wrote:
Justis;697594 Wrote:
Both manuals on their way! Enjoy!


Thanks for them both! I didn't even know there were two manuals.

Now...anyone know of a DIY fix parts/instruction for the tuning knob
flaw, or maybe even a shop/someone who can fix it permanently?




--
wgregt

I just got one of these radios and wonder if you could send me the manuals! At any rate, I fixed the tuning bump by buying a gear from an RC hobby shop, 18 tooth, 64 pitch, drilling out the hole to 5/32" and grinding it down to the correct height. Don't hammer the shaft to press on the gear, it will bend.

On Sunday, June 4, 2017 at 6:40:31 AM UTC-4, wrote:
On Monday, January 11, 2010 at 11:46:35 PM UTC-5, wgregt wrote:
Justis;697594 Wrote:
Both manuals on their way! Enjoy!


Thanks for them both! I didn't even know there were two manuals.

Now...anyone know of a DIY fix parts/instruction for the tuning knob
flaw, or maybe even a shop/someone who can fix it permanently?




--
wgregt

I just got one of these radios and wonder if you could send me the manuals! At any rate, I fixed the tuning bump by buying a gear from an RC hobby shop, 18 tooth, 64 pitch, drilling out the hole to 5/32" and grinding it down to the correct height. Don't hammer the shaft to press on the gear, it will bend.

Hi - trying to repair tuning mechanism on a GE 7-2990. Encountered tuning bump-split gear. Where did you find a replacement gear? Also, any help you could share on grinding, etc. appreciated. Thx!

yes mine finally started worked great a few months ago hope will find more repair info. thought abought using molding dough making imprint and mixing epoxy into mold .

Any further info to help me find a replacement gear for my 7-2990a ?
Nylon or brass or ?
Any identification of specific gear from hobby shop...like a part # or application ?
Thanks, jim

On Wed, 03 Oct 2018 17:27:30 -0700, baltusnik wrote:

+AD4 Any further info to help me find a replacement gear for my 7-2990a ?
+AD4 Nylon or brass or ?
+AD4 Any identification of specific gear from hobby shop...like a part +ACM or application ?
+AD4 Thanks, jim

McMaster Carr has a few standard plastic or brass gears listed on their website. Maybe something can be adapted?

There's alot of knowledgeable people at the antique radio forum:

http://antiqueradios.com/forums/view...4032ca097c7cd5

Hi Justis,
I was recently given a G.E. World Monitor P2900A SW radio from my father.
I was wondering if you happen to have a manual and or schematics for it?

t