Got to get gased up
 

The election is coming up soon, I need to get the old pickup out and check
the oil and gas so I can make my three county sweap to vote.

My property sits in the cornner of all three counties I so get three votes.

The republicans thank me very much.

Burr

Got to get gased up
 

On Oct 16, 8:07*pm, "Just Plan Burr" wrote:
- The election is coming up soon,
- I need to get the old pickup out and check
- the oil and gas so I can make my three
- county sweap to vote.
-
- My property sits in the cornner of all three counties I so get three
votes.
-
- The republicans thank me very much.
-
- Burr

BURR the 'Czech' is in the Mail.
but . . .
The Slovakia decided to take the Boat ;;-}} ~ RHF

Got to get gased up
 

Morning Roy!


"RHF" wrote in message
...
On Oct 16, 8:07 pm, "Just Plan Burr" wrote:
- The election is coming up soon,
- I need to get the old pickup out and check
- the oil and gas so I can make my three
- county sweap to vote.
-
- My property sits in the cornner of all three counties I so get three
votes.
-
- The republicans thank me very much.
-
- Burr

BURR the 'Czech' is in the Mail.
but . . .
The Slovakia decided to take the Boat ;;-}} ~ RHF

Got to get gased up
 

Thanks for Voting Republican.

Ki Ki Ki KiYyaaaaa,,,, I read that Kia is working on/developing some Kia
Hy-Brid cars.
cuhulin

Got to get gased up
 

Outrages to Remember Before Voting on November 2
http://www.standeyo.com

Are You Outraged?
I am Outraged!
cuhulin

Got to get gased up
 

On 10/18/2010 12:05 AM, RHF wrote:
On Oct 17, 5:36 pm, wrote:
- Thanks for Voting Republican.
-
- Ki Ki Ki KiYyaaaaa,,,,
- I read that Kia is working on/developing
- some Kia Hy-Brid cars.
- cuhulin

Half-Korean& Half-American Hybrid Cars . . .

-aka- Half-Metric& Half-SAE Hybrid Cars . . .
.
.

Don't get out much, do you?

Many "made in America" (non-hybrid) cars are "Half-Metric& Half-SAE"
and have been for years.

Got to get gased up
 

Joe from Kokomo wrote:


Many "made in America" (non-hybrid) cars are "Half-Metric& Half-SAE" and
have been for years.

I'm assuming you mean "inches".

Got to get gased up
 

http://www.devilfinder.com
Where are Kia cars made?

I already knew Kia cars are South Korean, with a factory also in
America.
How about Ssanyong cars? I already knew they are South Korean too.

Nissan and Toyota in backwater hick Mississippi
cuhulin

Got to get gased up
 

http://www.carxy.com/ssanyong/wallpaper2.html

Ssanyong,,, Dong-A Motor.
I Likes dat, they should have kept the Dong-A Motor name.Ding Dong-A
Motor, more is the better, a Russian guy once told me.

Back in the 1950's, Ssanyong built some Jeeps for U.S.Army.Hotchkiss, in
France built some Jeeps on into the 1960's.
In World War Two, Willys and Ford built Jeeps, there was a Jeep assembly
plant under the ground in England in World War Two.
Flat Fenders Forever!

http://www.devilfinder.com
Brian's Military Jeeps

Turn on the Lights and Power.
cuhulin

Got to get gased up
 

Joe from Kokomo wrote:


Many "made in America" (non-hybrid) cars are "Half-Metric& Half-SAE" and
have been for years.

On 10/18/2010 9:13 AM, dave wrote:

I'm assuming you mean "inches".

Certainly, but commonly referred to as "SAE" (as opposed to metric) in
an automotive context.

Got to get gased up
 

Joe from Kokomo wrote:

Joe from Kokomo wrote:


Many "made in America" (non-hybrid) cars are "Half-Metric& Half-SAE" and
have been for years.

On 10/18/2010 9:13 AM, dave wrote:

I'm assuming you mean "inches".

Certainly, but commonly referred to as "SAE" (as opposed to metric) in
an automotive context.


People call drywall "sheetrock" too. I call the old wrenches "English"
'cause that's what I was taught. I've always known SAE is a bolt
specification, not a measurement system.

Got to get gased up
 

On Oct 18, 6:13*am, dave wrote:

- - - RHF -wrote-
- - - Half-Korean & Half-American Hybrid Cars . . .
- - - -aka- Half-Metric & Half-SAE Hybrid Cars . . .

- - Joe from Kokomo -wrote-
- - Many "made in America" (non-hybrid) cars are
- - "Half-Metric& Half-SAE" and have been for years.

- Dave -wrote-
- I'm assuming you mean "inches".

'Special Dave' =FYI=
Metric Wrench Sizes [mm] are shown, along with their
"American Standard" equivalence, in 1/1000s of an Inch.
"Standard-Size" Wrenches refers to SAE Sizes in Inches*
http://www.vaughns-1-pagers.com/scie...conversion.htm
* Fractions of Inches : 1/16", 3/8", 19/32", 7/8", 1-1/4"
-exception- a One Inch 'SAE' Wrench is a 1" Wrench

"SAE" = the Society of Automotive Engineers.
http://en.wikipedia.org/wiki/SAE_International

well at least that is what 'i' learned in high school
back in the early 1960s ~ RHF

Got to get gased up
 

I never did learn that Stupid metrics.
All gassed up and nowhere to go.Tremors is on the AMC channel.

http://www.devilfinder.com
Gigantic ring on the Sun's surface

Enormous ring.
cuhulin

Got to get gased up
 

Metric and SAE don't match. Can't interchange, you will round some nuts!!


Burr

"RHF" wrote in message
...
On Oct 18, 6:13 am, dave wrote:

- - - RHF -wrote-
- - - Half-Korean & Half-American Hybrid Cars . . .
- - - -aka- Half-Metric & Half-SAE Hybrid Cars . . .

- - Joe from Kokomo -wrote-
- - Many "made in America" (non-hybrid) cars are
- - "Half-Metric& Half-SAE" and have been for years.

- Dave -wrote-
- I'm assuming you mean "inches".

'Special Dave' =FYI=
Metric Wrench Sizes [mm] are shown, along with their
"American Standard" equivalence, in 1/1000s of an Inch.
"Standard-Size" Wrenches refers to SAE Sizes in Inches*
http://www.vaughns-1-pagers.com/scie...conversion.htm
* Fractions of Inches : 1/16", 3/8", 19/32", 7/8", 1-1/4"
-exception- a One Inch 'SAE' Wrench is a 1" Wrench

"SAE" = the Society of Automotive Engineers.
http://en.wikipedia.org/wiki/SAE_International

well at least that is what 'i' learned in high school
back in the early 1960s ~ RHF

Got to get gased up
 

On Oct 18, 9:57*am, wrote:
http://www.carxy.com/ssanyong/wallpaper2.html

Ssanyong,,, Dong-A Motor.
I Likes dat, they should have kept the Dong-A Motor name.Ding Dong-A
Motor, more is the better, a Russian guy once told me.

Back in the 1950's, Ssanyong built some Jeeps for U.S.Army.Hotchkiss, in
France built some Jeeps on into the 1960's.
In World War Two, Willys and Ford built Jeeps, there was a Jeep assembly
plant under the ground in England in World War Two.
Flat Fenders Forever!

http://www.devilfinder.com
Brian's Military Jeeps

Turn on the Lights and Power.
cuhulin

Ding-Dong automobiles never break down. Highest reliability rating as
per the latest data . Where is the nearest dealership ?

Got to get gased up
 

On Oct 18, 4:58*pm, "Just Plan Burr" wrote:
- Metric and SAE don't match.
- Can't interchange, you will round some nuts!!
-
- Burr

BURR,

That's why most home {diy} mechanics have both
a Set of Metrics and a Set of SAE Tools . . .

Just like having a common Slotted [Flat] Screwdriver
and a Phillips [Pointed] Screwdriver; but please don't
try to use a Phillips on a Reed-and-Prince Screw Head.

Plus there are Allen Wrenches [Hex-Key/Head] in both
SAE and Metric Sizes too.

often in spite of all the 'metric' and 'sae' tools and
other fancy devices . . . it all comes down to . . .
using a bigger hammer ~ RHF
http://www.af.mil/shared/media/ggall...100324-011.jpg