| Home |
| Search |
| Today's Posts |
|
#2
|
|||
|
|||
|
In article ,
"Ralph D." wrote: Hi, I need a cable (ideally about 20ft), stereo 3.5mm male/male, highly shielded to connect my audio source to a transmitter across a room. This cable passes many sources of interference, so the shielding is critical. I would prefer to get it from Amazon so as to get it quick with Prime (incredibly narrow window of free-time during a currently very busy schedule) but would be OK with ordering from one of the Ham sites if turnaround time is very good. I could not get a good search parameter on Amazon that didn't turn up thousands of hits that I just don't have time to sift through right now. Any good cable with known good isolation would be good. I have ferrite chokes I can use, but would prefer a cable of suitable quality that did not need them (current cable is getting interference even with them as this is not just run-of-the-mill 60cycle stuff). Any good suggestions would be appreciated. Look for a cable TV-coax (RG-6, maybe) that has a continuous foil shield. Isaac |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|