| Home |
| Search |
| Today's Posts |
|
#5
|
|||
|
|||
|
Since you said you were a SWL, then you're not going to be transmitting ...
so i wouldn't worry about trying to be too exact on the dimensions. An few inches more or less really wont make much of a difference when receiving. wrote in message om... wrote in message . com... HI I am a SWL trying to construct a portable 20mtr Di pole from a 14ft x 1inch length of ali tube to use at my holiday trailer park can someone tell me how many turns I need to put on the centr loading coil and what diamiter the coil should be I can not find a suitable Article on the net any help would be apreciated Barry Hi I gather it will be easier to telliscope another peice of tube inside the 14ft length so as to ajust the length to 16.5ft or there abouts aprox Quarter wave at 20 mtrs so if I use a tuner I could use the same pole for 40 and 10 It is not possible to have any sort of wires due to restrictions on the park so I would have to use a ground stake or try the water main |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Inverted ground plane antenna: compared with normal GP and low dipole. | Antenna | |||
| helicity on vertical dipoles | Antenna | |||
| helicity on vertical dipoles | Antenna | |||
| QST Article: An Easy to Build, Dual-Band Collinear Antenna | Antenna | |||
| Poor vertical performance on metal sheet roof - comments? | Antenna | |||