Jeff Renkin wrote in message

Actually the lowering of the speed has NOTHING to do with it. If you ARE going to
learn the code, it makes more sense to learn it at the fastest speed right away. If
you learn it at 5 wpm, it makes it much harder later to go faster with it.

Nope, it doesn't. If that were the case, I would be in the same speed
league as you.
If you are going to take a 20 wpm test, and ditch the code upon
passing the test, it might make sense, but to someone that intends to
actually use the code, it does not. You would be a "one speed wonder"
.. The first person that came along at 9 wpm would cause you to vapor
lock. I started at -5 wpm and went up.
Quickly. It sure didn't seem to hurt me, being I peaked at my limits
of "clean" manual "paddle" keying. My abilty to send cleanly using a
paddle determined my real world limit. Not my abilty to receive. I
can't send cleanly with a paddle over about 55-60 wpm and thats
pushing it to the edge. After that I get too sloppy for my tastes.
Being I refuse to use a keyboard, which I hate, that was my limit. If
I used the keyboard, I probably could have eventually hit 70-75-80
wpm. The dots are so fast at those speeds, even at 60, that you don't
really listen for individual dots. You gauge from the length in ms of
the string. It's almost a blur. To be a decent CW operator, you must
gradually work through all the speeds. Your theory does not hold
water. But to be expected from someone who doesn't work cw.

Lowering the speed to 5 wpm was idiotic. As if that made it easier or
something.

Well, being many upgraded to extra in one fell swoop after they
dropped speed, it must have made some difference if the rest couldn't
get 13 or 20 wpm. Of course, I suspect the vast majority of those
didn't really practice enough.

Ever hear of the Farnsworth system?

Duh...

Learning the code is like
learning a language, you hear the musical sounds of the letters and words, slowing it
down only makes it harder.

Slowing it down only makes it harder to keep track of previously sent
letters, if head copying. That makes it harder to make words out of
the copy. You have to copy behind a bit. But slowing it down does not
make it harder to copy the characters. Trust me, for a rank beginner,
it's easier to learn and pass 5 wpm, than it is to learn and pass 20
wpm. That is, unless they alter the proper timing, and leave huge gaps
between letters on the test. And thats not 20 wpm any more. The
farnsworth method teaches incorrect character spacing, and overall
lousy timing. You learn lousy timing from day one, and that is no way
to live. Not what I consider good. An *actual* 20 wpm at normal
spacing will cause a beginner to vapor lock when they test, if they
learned with the improperly spaced farnsworth method. The Farnsworth
method is NOT a good method to use for people that intend to use the
code in the real world. MK