Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old October 28th 03, 03:16 AM
Frank Dresser
 
Posts: n/a
Default


"Diverd4777" wrote in message
...
Thanks Frank..

- Guess I'll get the main ferrite loop to work first, then try the

long leads &
the coils.
retuning it with 1, 2,4 then 8 foot lengths to see what obtains..

I guess Very Very thin copper wire would introduce the least

capacitance ??

Dan


Thin wire would introduce the least capacitance, but there won't be much
difference with reasonably spaced turns. The capacitance goes down
quickly with spacing, and there's really not much spacing difference
between very fine and fine wire if you wind maybe 12 turns per inch or
so. That's not a magic number or anything, just wind, test and adjust.

Frank Dresser


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Colinear 2 meter antenna question Ken Bessler Antenna 3 November 19th 04 04:21 AM
The "TRICK" to TV 'type' Coax Cable [Shielded] SWL Loop Antennas {RHF} RHF Antenna 27 November 3rd 04 01:38 PM
Antenna Design Information Paul Burridge Antenna 0 October 25th 04 07:12 PM
Yagi / Beam antenna theory question... Nick C Antenna 12 October 5th 03 12:15 PM
Mobile Antenna Question Richard Clark Antenna 3 August 23rd 03 08:07 PM


All times are GMT +1. The time now is 10:57 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017