Question about types of speakers for shortwave.
 

I've been thinking about removing some speakers stacks I use. One I used for
the 140X and the other for the 129X, at first I really liked the sound. But
since I picked up a pair of some discontinued Radio Shack Amplified Speakers
(cat#40-1361) last summer at a garage sale for like ten dollars, I've kind of
been thinking about asking the group it's opinion and what it is they use or
what would they do if they were me? **No smart a** comments** ;-)

Those amplified ones are hooked to the DX394, actually I stopped listening to
that piece becasue of the sound, I tried my stacks that are hooked to my
Hammarlunds, but that didn't do it. Tried other combos and that stock speaker
absolutely is a crime that they even put it in there, really. But these
amplified ones take four c batteries and are 'extremely' heavy for two
speakers, I couldn't believe it, I felt like I stole them from that woman.
But it has made the 394 "come back to life." :-)

But between those and switching speakers on my scanner (BC9000XLT).....I used
to use the stock but it sucks plus the way I have it configured I had to use an
extension speaker. I went with the Rat Shack external speaker, I figured it
was good enough. But the other day I was cleaning out the closet in the radio
room ( I highly recommend it to everyone) I found stuff I forgot I even had
and actually some things that I don't remember where or who I got them from.

But I came up on a pair of *Aiwa* speakers that were used 'stock' ---pretty
sure in an Ford Taurus. I did a little cutting and soldering and baddabing, I
now have that one speaker hooked to the 9000 and WOW what a difference. On the
back of the speaker it says 40w with an 8 impedance. But I'm gonna keep that
setup.

Should I use the other one for one of my Hammarlunds? I KNOW there is more
than enough in one of those HQ's to drive one of those Aiwas, or would it
sound like sh*t? I just think that the speaker/speakers I have now run into
the Hammarlunds are too much and not really getting to *drive* them to their
full potential.

I'm no audiophile, and I know there is a few in here so I bow to the *sound
Gods* on this one. Like on Steve's setup with his Drake, I saw his modest
speaker. What about you Brian? You have some boatanchors like I do.
Shouldn't I go smaller and get the most out of the speaker or a lot of speaker
without it reaching it's potential.

**Sorry for the longer than usual post, looking forward to many replies.

Thanks,
DX

On 18 Jan 2004 18:43:37 GMT, (Dxluver) wrote:

I've been thinking about removing some speakers stacks I use. One I used for
the 140X and the other for the 129X, at first I really liked the sound. But
since I picked up a pair of some discontinued Radio Shack Amplified Speakers
(cat#40-1361) last summer at a garage sale for like ten dollars, I've kind of
been thinking about asking the group it's opinion and what it is they use or
what would they do if they were me? **No smart a** comments** ;-)

snip

Should I use the other one for one of my Hammarlunds? I KNOW there is more
than enough in one of those HQ's to drive one of those Aiwas, or would it
sound like sh*t? I just think that the speaker/speakers I have now run into
the Hammarlunds are too much and not really getting to *drive* them to their
full potential.

I'm no audiophile, and I know there is a few in here so I bow to the *sound
Gods* on this one. Like on Steve's setup with his Drake, I saw his modest
speaker. What about you Brian? You have some boatanchors like I do.
Shouldn't I go smaller and get the most out of the speaker or a lot of speaker
without it reaching it's potential.

**Sorry for the longer than usual post, looking forward to many replies.

Thanks,
DX

DX,
While not a boatanchor owner I will share what I found when needing an
external speaker for an R75 (yes, with an R75 an external speaker is a
MUST). Tried a 4" RatShack widerange speaker (Optimus XTS 3, 7 watt
max) and it was okay; definitely enough powerr to drive and it gave
sufficient volume & clarity, mostly mid-range with moderately more
bass response than treble. Then for kicks hooked to a KLH 911 (5 inch
woofer, 1 inch tweeter, 100 watt max) and WOW! Yes, the speaker is
capable of handling much more power than the R75 offers but there was
sufficient power to drive it without having to crank up the audio.
The sound clarity was greatly improved and unless the bands are really
noisy most folks who hear it don't realize they're listening to
shortwave - "Naah, it sounds to good to come from far away" 8-} Do
keep in mind that the answer to this will vary depending on the
speaker; some just plain like to "suck watts" in order to get their
cones moving.

To answer your question, should you use what you put together with
your other HQ's, my best advise is to hook one up and judge the sound
quality yourself. Not trying to be flippant, but your ears know what
sounds good to them and you'll know by where you have to set your
volume if you're have enough power to drive it. I like to keep my
volume settings no higher than about a third of the maximum so the
amplifiers are running "where they are happier" as there tends to be
less distortion.

Hope this helps, and I too am looking forward to what others have
found.

Howard

My old Sony boombox died, but the speakers were fine, so I kept them. Using
an audio switch box, I can switch between the receiver, the television, the
vcr or the dvd as sound sources, so I can use the speakers for my dx394, and
it works very well. I had to set things up such that the dx394 could use the
speakers without using the component stereo system I have. With the
component system running, the receiver gets wiped out with RF, so I don't
use the amp with the receiver. It lacks bass, but it sound infinitely better
than what is provided in the receiver itself. The Sony speakers are about 3
inches diameter, so they do provide excellent sound quality, but it is
better than the receiver alone. Boom boxes I have looked at lack an
auxilliary input to allow you to use the amplifier, so if I were to upgrade,
I'd have to spend some money for a real stereo.

"Howard" wrote in message
...
On 18 Jan 2004 18:43:37 GMT, (Dxluver) wrote:

I've been thinking about removing some speakers stacks I use. One I used
for
the 140X and the other for the 129X, at first I really liked the sound.
But
since I picked up a pair of some discontinued Radio Shack Amplified
Speakers
(cat#40-1361) last summer at a garage sale for like ten dollars, I've
kind of
been thinking about asking the group it's opinion and what it is they use
or
what would they do if they were me? **No smart a** comments** ;-)

snip

Should I use the other one for one of my Hammarlunds? I KNOW there is
more
than enough in one of those HQ's to drive one of those Aiwas, or would
it
sound like sh*t? I just think that the speaker/speakers I have now run
into
the Hammarlunds are too much and not really getting to *drive* them to
their
full potential.

I'm no audiophile, and I know there is a few in here so I bow to the
*sound
Gods* on this one. Like on Steve's setup with his Drake, I saw his
modest
speaker. What about you Brian? You have some boatanchors like I do.
Shouldn't I go smaller and get the most out of the speaker or a lot of
speaker
without it reaching it's potential.

**Sorry for the longer than usual post, looking forward to many replies.

Thanks,
DX

DX,
While not a boatanchor owner I will share what I found when needing an
external speaker for an R75 (yes, with an R75 an external speaker is a
MUST). Tried a 4" RatShack widerange speaker (Optimus XTS 3, 7 watt
max) and it was okay; definitely enough powerr to drive and it gave
sufficient volume & clarity, mostly mid-range with moderately more
bass response than treble. Then for kicks hooked to a KLH 911 (5 inch
woofer, 1 inch tweeter, 100 watt max) and WOW! Yes, the speaker is
capable of handling much more power than the R75 offers but there was
sufficient power to drive it without having to crank up the audio.
The sound clarity was greatly improved and unless the bands are really
noisy most folks who hear it don't realize they're listening to
shortwave - "Naah, it sounds to good to come from far away" 8-} Do
keep in mind that the answer to this will vary depending on the
speaker; some just plain like to "suck watts" in order to get their
cones moving.

To answer your question, should you use what you put together with
your other HQ's, my best advise is to hook one up and judge the sound
quality yourself. Not trying to be flippant, but your ears know what
sounds good to them and you'll know by where you have to set your
volume if you're have enough power to drive it. I like to keep my
volume settings no higher than about a third of the maximum so the
amplifiers are running "where they are happier" as there tends to be
less distortion.

Hope this helps, and I too am looking forward to what others have
found.

Howard

You're on the right track. The advent of computer users having better
multimedia sound cards has caused manufacturers to market some
great-sounding compact self-amplified speakers. And the great news is that
these speakers work extremely well with even portable radios, and are
available at prices significantly lower than you would have expected to pay
even a couple of years ago.

Creative Labs has teamed with Cambridge Soundworks to make some models, and
the collaboration has resulted in several excellent setups for listening to
shortwave radio. I've seen the 3-piece set at Wal-Mart for less than
$35.00. Trust me -- you WANT a subwoofer -- your radio is producing signals
that simply cannot be adequately reproduced by most table-top speakers, even
in MW and SW. You'll hear depth, clarity, and ambient studio
characteristics you would not be able to discern otherwise. Also, IMHO, you
would have to buy a Bose Acoustic Wave to rival the sound on my ATS-909 in
FM stereo using these speakers. It really sounds that good.

Another plus is that they're easily switched between radios. Plug them in
to your headphone jack and you're set to go (may need to get a std. to
stereo mini-plug adapter for some desktops). For more permanent
installations, you may want to build a simple switch to choose between
radios.

Happy listening!

-- Stinger

"Dxluver" wrote in message
...
I've been thinking about removing some speakers stacks I use. One I used
for
the 140X and the other for the 129X, at first I really liked the sound.
But
since I picked up a pair of some discontinued Radio Shack Amplified
Speakers
(cat#40-1361) last summer at a garage sale for like ten dollars, I've
kind of
been thinking about asking the group it's opinion and what it is they use
or
what would they do if they were me? **No smart a** comments** ;-)

Those amplified ones are hooked to the DX394, actually I stopped
listening to
that piece becasue of the sound, I tried my stacks that are hooked to my
Hammarlunds, but that didn't do it. Tried other combos and that stock
speaker
absolutely is a crime that they even put it in there, really. But these
amplified ones take four c batteries and are 'extremely' heavy for two
speakers, I couldn't believe it, I felt like I stole them from that
woman.
But it has made the 394 "come back to life." :-)

But between those and switching speakers on my scanner (BC9000XLT).....I
used
to use the stock but it sucks plus the way I have it configured I had to
use an
extension speaker. I went with the Rat Shack external speaker, I figured
it
was good enough. But the other day I was cleaning out the closet in the
radio
room ( I highly recommend it to everyone) I found stuff I forgot I even
had
and actually some things that I don't remember where or who I got them
from.

But I came up on a pair of *Aiwa* speakers that were used 'stock'
---pretty
sure in an Ford Taurus. I did a little cutting and soldering and
baddabing, I
now have that one speaker hooked to the 9000 and WOW what a difference.
On the
back of the speaker it says 40w with an 8 impedance. But I'm gonna keep
that
setup.

Should I use the other one for one of my Hammarlunds? I KNOW there is
more
than enough in one of those HQ's to drive one of those Aiwas, or would it
sound like sh*t? I just think that the speaker/speakers I have now run
into
the Hammarlunds are too much and not really getting to *drive* them to
their
full potential.

I'm no audiophile, and I know there is a few in here so I bow to the
*sound
Gods* on this one. Like on Steve's setup with his Drake, I saw his
modest
speaker. What about you Brian? You have some boatanchors like I do.
Shouldn't I go smaller and get the most out of the speaker or a lot of
speaker
without it reaching it's potential.

**Sorry for the longer than usual post, looking forward to many replies.

Thanks,
DX

These are nice Swiss Army amplified speakers. They make any radio
sound like a 1960 Grundig.

http://www.cambridgesoundworks.com/s...z& type=store

On 18 Jan 2004 18:43:37 GMT, (Dxluver) wrote:

I've been thinking about removing some speakers stacks I use. One I used for
the 140X and the other for the 129X, at first I really liked the sound. But
since I picked up a pair of some discontinued Radio Shack Amplified Speakers
(cat#40-1361) last summer at a garage sale for like ten dollars, I've kind of
been thinking about asking the group it's opinion and what it is they use or
what would they do if they were me? **No smart a** comments** ;-)

Those amplified ones are hooked to the DX394, actually I stopped listening to
that piece becasue of the sound, I tried my stacks that are hooked to my
Hammarlunds, but that didn't do it. Tried other combos and that stock speaker
absolutely is a crime that they even put it in there, really. But these
amplified ones take four c batteries and are 'extremely' heavy for two
speakers, I couldn't believe it, I felt like I stole them from that woman.
But it has made the 394 "come back to life." :-)

But between those and switching speakers on my scanner (BC9000XLT).....I used
to use the stock but it sucks plus the way I have it configured I had to use an
extension speaker. I went with the Rat Shack external speaker, I figured it
was good enough. But the other day I was cleaning out the closet in the radio
room ( I highly recommend it to everyone) I found stuff I forgot I even had
and actually some things that I don't remember where or who I got them from.

But I came up on a pair of *Aiwa* speakers that were used 'stock' ---pretty
sure in an Ford Taurus. I did a little cutting and soldering and baddabing, I
now have that one speaker hooked to the 9000 and WOW what a difference. On the
back of the speaker it says 40w with an 8 impedance. But I'm gonna keep that
setup.

Should I use the other one for one of my Hammarlunds? I KNOW there is more
than enough in one of those HQ's to drive one of those Aiwas, or would it
sound like sh*t? I just think that the speaker/speakers I have now run into
the Hammarlunds are too much and not really getting to *drive* them to their
full potential.

I'm no audiophile, and I know there is a few in here so I bow to the *sound
Gods* on this one. Like on Steve's setup with his Drake, I saw his modest
speaker. What about you Brian? You have some boatanchors like I do.
Shouldn't I go smaller and get the most out of the speaker or a lot of speaker
without it reaching it's potential.

**Sorry for the longer than usual post, looking forward to many replies.

Thanks,
DX

That's them.

On Sun, 18 Jan 2004 14:11:48 -0600, "Stinger"
wrote:

You're on the right track. The advent of computer users having better
multimedia sound cards has caused manufacturers to market some
great-sounding compact self-amplified speakers. And the great news is that
these speakers work extremely well with even portable radios, and are
available at prices significantly lower than you would have expected to pay
even a couple of years ago.

Creative Labs has teamed with Cambridge Soundworks to make some models, and
the collaboration has resulted in several excellent setups for listening to
shortwave radio. I've seen the 3-piece set at Wal-Mart for less than
$35.00. Trust me -- you WANT a subwoofer -- your radio is producing signals
that simply cannot be adequately reproduced by most table-top speakers, even
in MW and SW. You'll hear depth, clarity, and ambient studio
characteristics you would not be able to discern otherwise. Also, IMHO, you
would have to buy a Bose Acoustic Wave to rival the sound on my ATS-909 in
FM stereo using these speakers. It really sounds that good.

Another plus is that they're easily switched between radios. Plug them in
to your headphone jack and you're set to go (may need to get a std. to
stereo mini-plug adapter for some desktops). For more permanent
installations, you may want to build a simple switch to choose between
radios.

Happy listening!

-- Stinger

"Dxluver" wrote in message
...
I've been thinking about removing some speakers stacks I use. One I used
for
the 140X and the other for the 129X, at first I really liked the sound.
But
since I picked up a pair of some discontinued Radio Shack Amplified
Speakers
(cat#40-1361) last summer at a garage sale for like ten dollars, I've
kind of
been thinking about asking the group it's opinion and what it is they use
or
what would they do if they were me? **No smart a** comments** ;-)

Those amplified ones are hooked to the DX394, actually I stopped
listening to
that piece becasue of the sound, I tried my stacks that are hooked to my
Hammarlunds, but that didn't do it. Tried other combos and that stock
speaker
absolutely is a crime that they even put it in there, really. But these
amplified ones take four c batteries and are 'extremely' heavy for two
speakers, I couldn't believe it, I felt like I stole them from that
woman.
But it has made the 394 "come back to life." :-)

But between those and switching speakers on my scanner (BC9000XLT).....I
used
to use the stock but it sucks plus the way I have it configured I had to
use an
extension speaker. I went with the Rat Shack external speaker, I figured
it
was good enough. But the other day I was cleaning out the closet in the
radio
room ( I highly recommend it to everyone) I found stuff I forgot I even
had
and actually some things that I don't remember where or who I got them
from.

But I came up on a pair of *Aiwa* speakers that were used 'stock'
---pretty
sure in an Ford Taurus. I did a little cutting and soldering and
baddabing, I
now have that one speaker hooked to the 9000 and WOW what a difference.
On the
back of the speaker it says 40w with an 8 impedance. But I'm gonna keep
that
setup.

Should I use the other one for one of my Hammarlunds? I KNOW there is
more
than enough in one of those HQ's to drive one of those Aiwas, or would it
sound like sh*t? I just think that the speaker/speakers I have now run
into
the Hammarlunds are too much and not really getting to *drive* them to
their
full potential.

I'm no audiophile, and I know there is a few in here so I bow to the
*sound
Gods* on this one. Like on Steve's setup with his Drake, I saw his
modest
speaker. What about you Brian? You have some boatanchors like I do.
Shouldn't I go smaller and get the most out of the speaker or a lot of
speaker
without it reaching it's potential.

**Sorry for the longer than usual post, looking forward to many replies.

Thanks,
DX

Howard wrote:

DX,
While not a boatanchor owner I will share what I found when needing an
external speaker for an R75 (yes, with an R75 an external speaker is a
MUST). Tried a 4" RatShack widerange speaker (Optimus XTS 3, 7 watt
max) and it was okay; definitely enough powerr to drive and it gave
sufficient volume & clarity, mostly mid-range with moderately more
bass response than treble. Then for kicks hooked to a KLH 911 (5 inch
woofer, 1 inch tweeter, 100 watt max) and WOW! Yes, the speaker is
capable of handling much more power than the R75 offers but there was
sufficient power to drive it without having to crank up the audio.
The sound clarity was greatly improved and unless the bands are really
noisy most folks who hear it don't realize they're listening to
shortwave - "Naah, it sounds to good to come from far away" 8-} Do
keep in mind that the answer to this will vary depending on the
speaker; some just plain like to "suck watts" in order to get their
cones moving.

Has anyone found a good replacement speaker for the OEM one in the R75?
What size is the original one?


-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----

Howard wrote:

Has anyone found a good replacement speaker for the OEM one in the R75?
What size is the original one?


I use the RCA 40-5000, that rectangular "black box" with the black
steel-mesh grille that Radio Shack has sold forever under one name or
another. Works fine. Think I paid $19.00 for it.

Tony


----== Posted via Newsfeed.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeed.com The #1 Newsgroup Service in the World! 100,000 Newsgroups
---= 19 East/West-Coast Specialized Servers - Total Privacy via Encryption =---

On 18 Jan 2004 18:43:37 GMT, (Dxluver) wrote:

Another good source of passive speakers is those hideous cheapo shelf
systems at garage sales. Use the speakers and throw the rest away.

most folks who hear it don't realize they're listening to
shortwave - "Naah, it sounds to good to come from far away" 8-}

Yeah, I've had my folks and a friend mention that they couldn't believe that
was the V.O.T........coming in crystal clear through those amplifieds.

Not trying to be flippant, but your ears know what
sounds good to them and you'll know by where you have to set your
volume if you're have enough power to drive it.

Sure- sure- I know what you mean. While the 129X is down, I'll do that with
the 140X. The the things with the Hammars is that I KNOW there is more than
enough to drive one of these Aiwa speakers, no problem.

Hopefully it sounds sweet.

Thanks Howard:-)

I use the RCA 40-5000, that rectangular "black box" with the black
steel-mesh grille that Radio Shack has sold forever under one name or
another. Works fine. Think I paid $19.00 for it.

Oh really?

Sounds like that one link I saw that selld these shortwave/scanner/cb
speakers.......they're pretty nice. I guess you don't need BIG for good sound.
:-)

I use the RCA 40-5000, that rectangular "black box" with the black
steel-mesh grille that Radio Shack has sold forever under one name or
another

Tony,
Is that the cat#?

On Tue, 20 Jan 2004 18:07:32 -0600, Dxluver wrote
(in message ):

most folks who hear it don't realize they're listening to
shortwave - "Naah, it sounds to good to come from far away" 8-}

Yeah, I've had my folks and a friend mention that they couldn't believe that
was the V.O.T........coming in crystal clear through those amplifieds.

Not trying to be flippant, but your ears know what
sounds good to them and you'll know by where you have to set your
volume if you're have enough power to drive it.

Sure- sure- I know what you mean. While the 129X is down, I'll do that with
the 140X. The the things with the Hammars is that I KNOW there is more than
enough to drive one of these Aiwa speakers, no problem.

Hopefully it sounds sweet.

Thanks Howard:-)

--------------------------------------------------------

I grabbed a close-out (thirty dollars) on the 40-4094 "Wall-Mount Speaker".

The part# is wrong but this appears to be the catalog entry on this speaker
"set".

http://www.radioshack.com/product.as...oduct%5Fid=40-
4099

It sounds /very/ good and I'm driving it with a DX-398 (!!) and a CCradio+.

I'm even thinking of trying to find another so I can listen to NPR in stereo
[dux].



Gray Shockley
-----------------------
DX-392 DX-398
RX-320 DX-399
CCradio+ w/RS Loop
Justice AM Antenna
Torus Tuner (3-13 MHz)
Select-A-Tenna
-----------------------
Vicksburg, MS US

I've been using those same speakers for "surround" on the home theater for
six years. They are solid performers, with frequency response and power
ratings greater than needed for rear channels. In other words....perfect!

-- Stinger

"Gray Shockley" wrote in message
.com...
On Tue, 20 Jan 2004 18:07:32 -0600, Dxluver wrote
(in message ):

most folks who hear it don't realize they're listening to
shortwave - "Naah, it sounds to good to come from far away" 8-}

Yeah, I've had my folks and a friend mention that they couldn't believe
that
was the V.O.T........coming in crystal clear through those amplifieds.

Not trying to be flippant, but your ears know what
sounds good to them and you'll know by where you have to set your
volume if you're have enough power to drive it.

Sure- sure- I know what you mean. While the 129X is down, I'll do that
with
the 140X. The the things with the Hammars is that I KNOW there is more
than
enough to drive one of these Aiwa speakers, no problem.

Hopefully it sounds sweet.

Thanks Howard:-)

--------------------------------------------------------

I grabbed a close-out (thirty dollars) on the 40-4094 "Wall-Mount
Speaker".

The part# is wrong but this appears to be the catalog entry on this
speaker
"set".


http://www.radioshack.com/product.as...oduct%5Fid=40-
4099

It sounds /very/ good and I'm driving it with a DX-398 (!!) and a
CCradio+.

I'm even thinking of trying to find another so I can listen to NPR in
stereo
[dux].



Gray Shockley
-----------------------
DX-392 DX-398
RX-320 DX-399
CCradio+ w/RS Loop
Justice AM Antenna
Torus Tuner (3-13 MHz)
Select-A-Tenna
-----------------------
Vicksburg, MS US

On Tue, 20 Jan 2004 21:25:09 -0600, Stinger wrote
(in message ):

I've been using those same speakers for "surround" on the home theater for
six years. They are solid performers, with frequency response and power
ratings greater than needed for rear channels. In other words....perfect!

-- Stinger


Sure is very nice.

I called my favorite RadioShack "associate" last night and asked her to find
another one for me.

Now I've got to find a place that'll make the enclosures - in new apartment
don't have any access to any tools at all - (our son+wife on the chicken farm
down in Brookhaven are getting a great deal from our "have to get rid of").




Gray Shockley
--------------------------------------------------------
However, I may have to, pretty much, give
up on shortwave - no access to the outside
from here (old hotel from the 1930s and
the windows don't open) Durn!!


"Gray Shockley" wrote in message
.com...
On Tue, 20 Jan 2004 18:07:32 -0600, Dxluver wrote
(in message ):

most folks who hear it don't realize they're listening to
shortwave - "Naah, it sounds to good to come from far away" 8-}

Yeah, I've had my folks and a friend mention that they couldn't believe
that
was the V.O.T........coming in crystal clear through those amplifieds.

Not trying to be flippant, but your ears know what
sounds good to them and you'll know by where you have to set your
volume if you're have enough power to drive it.

Sure- sure- I know what you mean. While the 129X is down, I'll do that
with
the 140X. The the things with the Hammars is that I KNOW there is more
than
enough to drive one of these Aiwa speakers, no problem.

Hopefully it sounds sweet.

Thanks Howard:-)

--------------------------------------------------------

I grabbed a close-out (thirty dollars) on the 40-4094 "Wall-Mount
Speaker".

The part# is wrong but this appears to be the catalog entry on this
speaker
"set".


http://www.radioshack.com/product.as...oduct%5Fid=40-
4099

It sounds /very/ good and I'm driving it with a DX-398 (!!) and a
CCradio+.

I'm even thinking of trying to find another so I can listen to NPR in
stereo
[dux].



Gray Shockley
-----------------------
DX-392 DX-398
RX-320 DX-399
CCradio+ w/RS Loop
Justice AM Antenna
Torus Tuner (3-13 MHz)
Select-A-Tenna
-----------------------
Vicksburg, MS US

STARMAN,

"Has anyone found a good replacement speaker for the OEM
one in the R75? What size is the original one?"

NOTE: The Icom IC-R75's 'exterior' Speaker Grill is
very small and ONLY Measures 1.75" Wide by 2.25" High.

My "Guess-A-Mate" is the Speaker is basic 1.5" Round.

! ! ! SOMEONE CORRECT ME IF I AM WRONG ! ! !


Well, NOT a Replacement 'internal' Speaker but here is a
List of the 'better' low cost External Speakers.

READ Message #4360 in the "Icom IC-R75" eGroup on YAHOO !

SPEAKERS: External Speakers for the ICOM IC-R75

GoTo= http://groups.yahoo.com/group/icomr75/message/4360

Most Often Recommended External Speakers for the Icom IC-R75.
That were Suggested as working well with the Icom IC-R75 by
the Members of the YAHOO eGroup.


hth ~ RHF
..
..
= = = starman
= = = wrote in message ...
Howard wrote:

DX,
While not a boatanchor owner I will share what I found when needing an
external speaker for an R75 (yes, with an R75 an external speaker is a
MUST). Tried a 4" RatShack widerange speaker (Optimus XTS 3, 7 watt
max) and it was okay; definitely enough powerr to drive and it gave
sufficient volume & clarity, mostly mid-range with moderately more
bass response than treble. Then for kicks hooked to a KLH 911 (5 inch
woofer, 1 inch tweeter, 100 watt max) and WOW! Yes, the speaker is
capable of handling much more power than the R75 offers but there was
sufficient power to drive it without having to crank up the audio.
The sound clarity was greatly improved and unless the bands are really
noisy most folks who hear it don't realize they're listening to
shortwave - "Naah, it sounds to good to come from far away" 8-} Do
keep in mind that the answer to this will vary depending on the
speaker; some just plain like to "suck watts" in order to get their
cones moving.

Has anyone found a good replacement speaker for the OEM one in the R75?
What size is the original one?

..

NOTE: The Icom IC-R75's 'exterior' Speaker Grill is
very small and ONLY Measures 1.75" Wide by 2.25" High.
READ Message #4360 in the "Icom IC-R75" eGroup on YAHOO !

I would be tempted to modify the R75 speaker grill and install a better
internal speaker.


-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----

RHF wrote:

STARMAN,

"Has anyone found a good replacement speaker for the OEM
one in the R75? What size is the original one?"

NOTE: The Icom IC-R75's 'exterior' Speaker Grill is
very small and ONLY Measures 1.75" Wide by 2.25" High.

My "Guess-A-Mate" is the Speaker is basic 1.5" Round.

! ! ! SOMEONE CORRECT ME IF I AM WRONG ! ! !

Well, NOT a Replacement 'internal' Speaker but here is a
List of the 'better' low cost External Speakers.

READ Message #4360 in the "Icom IC-R75" eGroup on YAHOO !

SPEAKERS: External Speakers for the ICOM IC-R75

GoTo= http://groups.yahoo.com/group/icomr75/message/4360

Most Often Recommended External Speakers for the Icom IC-R75.
That were Suggested as working well with the Icom IC-R75 by
the Members of the YAHOO eGroup.

hth ~ RHF



The first one on their list is the one I use. Inexpensive,
well-made, effective. And as they point out, it looks like it came with
the Icom - a perfect match.

Tony


----== Posted via Newsfeed.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeed.com The #1 Newsgroup Service in the World! 100,000 Newsgroups
---= 19 East/West-Coast Specialized Servers - Total Privacy via Encryption =---

STARMAN,

NP2 = Not Practical -and/or- Not Possible

Due to the Icom IC-R75's Layout and Construction the
(built-in) Internal 1.5" Speaker: Is What It Is [.]

FWIW: A Modification that 'added' an Internal Speaker
under the Top Cover may be possible and practical.

But, the 'better' "Option" with the Icom IC-R75 is
simply using an External Speaker that's style and
color matches the appearance of the Icom IC-R75.

jm2cw ~ RHF
..
..
= = = starman
= = = wrote in message ...

NOTE: The Icom IC-R75's 'exterior' Speaker Grill is
very small and ONLY Measures 1.75" Wide by 2.25" High.
READ Message #4360 in the "Icom IC-R75" eGroup on YAHOO !

I would be tempted to modify the R75 speaker grill and install a better
internal speaker.

..

DX Luver,

"Hopefully it sounds sweet."

Promoted on the eHAM.Com WebSite
GoTo= http://www.eham.net/

"The 'SOUNDS SWEET' Communications speakers maximize intelligibility
from your transceiver, receiver or portable by reproducing only the
communications voice and shortwave music frequencies coming from your
SSB, AM or FM communication or shortwave radio."
GoTo= http://www.soundssweet.com/
The Sounds Sweet ia a 'little' "Pricey" at $99 +S&H.

I currently use on with my Kenwood R-5000
GoTo= http://groups.yahoo.com/group/kenwood-r5000/
Oh It... sounds sweet, Sounds Sweet. SOUNDS SWEET !


jm2cw ~ RHF
..
..
= = = (Dxluver)
= = = wrote in message ...
most folks who hear it don't realize they're listening to
shortwave - "Naah, it sounds to good to come from far away" 8-}

Yeah, I've had my folks and a friend mention that they couldn't believe that
was the V.O.T........coming in crystal clear through those amplifieds.

Not trying to be flippant, but your ears know what
sounds good to them and you'll know by where you have to set your
volume if you're have enough power to drive it.

Sure- sure- I know what you mean. While the 129X is down, I'll do that with
the 140X. The the things with the Hammars is that I KNOW there is more than
enough to drive one of these Aiwa speakers, no problem.

Hopefully it sounds sweet.

Thanks Howard:-)

..

I've done many mod's on HF receivers that weren't "practical". Most
owners wouldn't have bothered but I enjoy making a receiver better.


RHF wrote:

STARMAN,

NP2 = Not Practical -and/or- Not Possible

Due to the Icom IC-R75's Layout and Construction the
(built-in) Internal 1.5" Speaker: Is What It Is [.]

FWIW: A Modification that 'added' an Internal Speaker
under the Top Cover may be possible and practical.

But, the 'better' "Option" with the Icom IC-R75 is
simply using an External Speaker that's style and
color matches the appearance of the Icom IC-R75.

jm2cw ~ RHF
.
.
= = = starman
= = = wrote in message ...

NOTE: The Icom IC-R75's 'exterior' Speaker Grill is
very small and ONLY Measures 1.75" Wide by 2.25" High.
READ Message #4360 in the "Icom IC-R75" eGroup on YAHOO !

I would be tempted to modify the R75 speaker grill and install a better
internal speaker.


-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----

"Stinger" wrote in message ...
You're on the right track. The advent of computer users having better
multimedia sound cards has caused manufacturers to market some
great-sounding compact self-amplified speakers. And the great news is that
these speakers work extremely well with even portable radios, and are
available at prices significantly lower than you would have expected to pay
even a couple of years ago.

I run my R-75 through Cambridge Soundworks' Henry Kloss designed Model
88 table radio. It has a subwoofer and three sound modes, "Stereo",
"Wide", and "Mono", each of which provides a different listening
quality to SW signals. This set-up is a vast improvement over Icom's
stock speaker. The Model 88 is a superb receiver for fringe FM
reception to boot, but is less than mediocre for AM broadcast band
reception.

Regards,

Grumpus




Creative Labs has teamed with Cambridge Soundworks to make some models, and
the collaboration has resulted in several excellent setups for listening to
shortwave radio. I've seen the 3-piece set at Wal-Mart for less than
$35.00. Trust me -- you WANT a subwoofer -- your radio is producing signals
that simply cannot be adequately reproduced by most table-top speakers, even
in MW and SW. You'll hear depth, clarity, and ambient studio
characteristics you would not be able to discern otherwise. Also, IMHO, you
would have to buy a Bose Acoustic Wave to rival the sound on my ATS-909 in
FM stereo using these speakers. It really sounds that good.

Another plus is that they're easily switched between radios. Plug them in
to your headphone jack and you're set to go (may need to get a std. to
stereo mini-plug adapter for some desktops). For more permanent
installations, you may want to build a simple switch to choose between
radios.

Happy listening!

-- Stinger

"Dxluver" wrote in message
...
I've been thinking about removing some speakers stacks I use. One I used
for
the 140X and the other for the 129X, at first I really liked the sound.
But
since I picked up a pair of some discontinued Radio Shack Amplified
Speakers
(cat#40-1361) last summer at a garage sale for like ten dollars, I've
kind of
been thinking about asking the group it's opinion and what it is they use
or
what would they do if they were me? **No smart a** comments** ;-)

Those amplified ones are hooked to the DX394, actually I stopped
listening to
that piece becasue of the sound, I tried my stacks that are hooked to my
Hammarlunds, but that didn't do it. Tried other combos and that stock
speaker
absolutely is a crime that they even put it in there, really. But these
amplified ones take four c batteries and are 'extremely' heavy for two
speakers, I couldn't believe it, I felt like I stole them from that
woman.
But it has made the 394 "come back to life." :-)

But between those and switching speakers on my scanner (BC9000XLT).....I
used
to use the stock but it sucks plus the way I have it configured I had to
use an
extension speaker. I went with the Rat Shack external speaker, I figured
it
was good enough. But the other day I was cleaning out the closet in the
radio
room ( I highly recommend it to everyone) I found stuff I forgot I even
had
and actually some things that I don't remember where or who I got them
from.

But I came up on a pair of *Aiwa* speakers that were used 'stock'
---pretty
sure in an Ford Taurus. I did a little cutting and soldering and
baddabing, I
now have that one speaker hooked to the 9000 and WOW what a difference.
On the
back of the speaker it says 40w with an 8 impedance. But I'm gonna keep
that
setup.

Should I use the other one for one of my Hammarlunds? I KNOW there is
more
than enough in one of those HQ's to drive one of those Aiwas, or would it
sound like sh*t? I just think that the speaker/speakers I have now run
into
the Hammarlunds are too much and not really getting to *drive* them to
their
full potential.

I'm no audiophile, and I know there is a few in here so I bow to the
*sound
Gods* on this one. Like on Steve's setup with his Drake, I saw his
modest
speaker. What about you Brian? You have some boatanchors like I do.
Shouldn't I go smaller and get the most out of the speaker or a lot of
speaker
without it reaching it's potential.

**Sorry for the longer than usual post, looking forward to many replies.

Thanks,
DX

In article ,
(Dxluver) wrote:

I've been thinking about removing some speakers stacks I use. One I used for
the 140X and the other for the 129X, at first I really liked the sound. But
since I picked up a pair of some discontinued Radio Shack Amplified Speakers
(cat#40-1361) last summer at a garage sale for like ten dollars, I've kind of
been thinking about asking the group it's opinion and what it is they use or
what would they do if they were me? **No smart a** comments** ;-)

Snip

Sony model SS-MB100H

--
Telamon
Ventura, California