Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old January 28th 04, 02:40 PM
Brian
 
Posts: n/a
Default Icom R71A

Does anyone own this model or have any comments about it? How does it
compare with an R75? Thanks for any info.



  #2   Report Post  
Old January 28th 04, 03:54 PM
DK
 
Posts: n/a
Default

You should try the new R71 Yahoo-group. It started a couple of months ago:
http://groups.yahoo.com/group/ICOMR71A
and the IC-R75 one which is a bit "older" (2000):
http://groups.yahoo.com/group/icomr75


Have a look at http://home.swipnet.se/~w-38231/dxindexe.htm

I'm sure you'll find there what you're looking for !

--
D. Kremp ( Normandy / France)

Rx : - IC-R70 + KIWA audio mods + Pocom PFC 100
- IC-R71E + ESKAB-EDVIS PLAM Unit / 4 kHz filter X9M4D + FL-44 +
KIWA audio mods + WILLCO ICM 1024 B
Ant : - Datong AD 370
- Dressler ARA 30
- LW 25 m + FRT 7700

(remove "NOSPAM" to reply)



"Brian" a écrit dans le message de
k.net
|| Does anyone own this model or have any comments about it? How does it
|| compare with an R75? Thanks for any info.


  #3   Report Post  
Old January 29th 04, 01:10 PM
Rigali5
 
Posts: n/a
Default

The ICOM R71A is one of the best radio's ever made...and I had them all
  #4   Report Post  
Old January 30th 04, 11:55 PM
The Axelrods
 
Posts: n/a
Default



Brian wrote:

Does anyone own this model or have any comments about it? How does it
compare with an R75? Thanks for any info.





Excellent radio and always will be

--
73 and Best of DX
Shawn Axelrod

Visit the AMANDX DX site with info for the new or experienced listener:

http://www.angelfire.com/mb/amandx/index.html

REMEMBER ON A CLEAR DAY YOU CAN HEAR FOREVER


  #5   Report Post  
Old January 31st 04, 12:53 AM
Chris Dorn
 
Posts: n/a
Default

I agree. I've got one with the 6 and 4Khz filters. Excellent, well made,
radio. I prefer it over the newer R75. They seem to go for a song on the
used market. They may require some minor work (trim caps), but well
worth the effort.

Chris VE6RDC

The Axelrods wrote:


Brian wrote:

Does anyone own this model or have any comments about it? How does it
compare with an R75? Thanks for any info.





Excellent radio and always will be




  #6   Report Post  
Old January 31st 04, 05:22 PM
A.Pismo Clam
 
Posts: n/a
Default

There is a "Yahoo" group that I started, which is dedicated to the ICOM
R 71-A. We've got 42 members so far. You can see what it's all about he


http://groups.yahoo.com/group/ICOMR71A/?yguid=73942471




Brian wrote:

Does anyone own this model or have any comments about it? How does it
compare with an R75? Thanks for any info.





Excellent radio and always will be


--
MZ

  #7   Report Post  
Old January 31st 04, 08:53 PM
Bill Hennessy
 
Posts: n/a
Default

Icom in general has quality control problems. The R70 R71 and R71a were
among the worse. Thay will be in the shop being fixed more than on the air.

Bill, N5NOB


  #8   Report Post  
Old January 31st 04, 10:28 PM
A.Pismo Clam
 
Posts: n/a
Default

Hi Bill,

I've had my R71-A since 1992 and have not had a bit of a problem with
it; its run flawlessly all that time.

Must be someone else's rig that's on the blink...

Alain

Bill Hennessy wrote:

Icom in general has quality control problems. The R70 R71 and R71a were
among the worse. Thay will be in the shop being fixed more than on the air.

Bill, N5NOB



--
MZ

  #9   Report Post  
Old January 31st 04, 10:36 PM
Brian Hill
 
Posts: n/a
Default


"Bill Hennessy" wrote in message
. ..
Icom in general has quality control problems. The R70 R71 and R71a were
among the worse. Thay will be in the shop being fixed more than on the

air.

Bill, N5NOB



I've owned three and never had problems with any of them?


--
73 and good DXing
RX:
R-5000, SP-600 JX-6, SX-28
Ant:
100' longwire, Evesdropper Dipole

Brian's Radio Universe
http://webpages.charter.net/brianehill/


  #10   Report Post  
Old January 31st 04, 10:41 PM
Chris Dorn
 
Posts: n/a
Default

Can't say that I agree with this assessment. The original R70s had some
issues with poor soldering, but beyond that, I have heard of few major
problems. The trim caps on the VCO are a weak point with the R71. The
good news is that you can fix this yourself for under $20 in the field.
Try that with the newer radios. Also, these problems tend to develop
after 15 or more years of use. Kenwood was much worse with their potting
compound fiasco in the TS440 and R5000. Yaesu FRG8800 has PLL problems
the requires repair as well. Icom still supports the R71A, and the US
military bought lots of them too. I'm sure mine will go for another 10
years. And don't worry about the lithium battery - it too can be swapped
in the field for under $10.

Chris VE6RDC

Bill Hennessy wrote:
Icom in general has quality control problems. The R70 R71 and R71a were
among the worse. Thay will be in the shop being fixed more than on the air.

Bill, N5NOB



Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
ICOM R71A knob and collar needed BDK Equipment 0 December 17th 03 06:30 PM
ICOM R71A knob and collar needed BDK Equipment 0 December 17th 03 06:30 PM
FS: Icom R71A Mint or Trade Drake R8 + Cash radiobuff Shortwave 3 October 7th 03 11:43 AM
Trade Excellent Icom R71A tim Equipment 0 August 17th 03 04:56 AM
Trade Excellent Icom R71A tim Equipment 0 August 17th 03 04:56 AM


All times are GMT +1. The time now is 03:19 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017