Home |
Search |
Today's Posts |
#3
![]() |
|||
|
|||
![]()
I don't have a lock on WWVB on my normally-very-active big wall clock,
either. But, my little Oregon Scientific shows we had a full scale signal in Charleston, SC in the last 6 hours (It checks time 6 times a day). You can get to the NIST radio people at their email address: http://www.boulder.nist.gov/timefreq/index.html and read all about these services from NIST. The WWVB antenna pictures are worth the trip...(c; According to their webpage, this is the outage report: http://www.boulder.nist.gov/timefreq...wvboutages.htm During normal operation, the 60 kHz signal from WWVB is transmitted 24 hours per day, 7 days a week. The table includes all periods since January 1, 2004 when the signal was turned off or intermittent for more than 5 minutes. Date MJD Began (UTC) Ended (UTC) 03-06-2004 53070 1346 1500 01-02-2004 53006 1018 1113 01-01-2004 53005 1232 1328 http://www.boulder.nist.gov/timefreq/index.html On Sat, 13 Mar 2004 03:06:23 GMT, "DougSlug" wrote: About a week ago two Casio atomic watches and one Oregon Scientific atomic clock stopped syncing up at night. They were being kept in the exact same location as before, and they synced up reliably every (or almost every) night for a couple years. I can't figure out why this is happening. Have there been any changes in the WWVB transmitter and/or propagation conditions recently? I am located in central NJ, which can be a bit unreliable, but usually once I find a good spot in the house, it stays reliable...until now! - Doug Larry W4CSC POWER is our friend! |
Thread Tools | Search this Thread |
Display Modes | |
|
|