|
Grundig Satellit Yahoo group
I've been trying for 3 weeks to join the Grundig Satellit Yahoo group and
my membership has been pending since 3 weeks ! I have sent some emails to the group moderator but he looks like being either blind or dumb. I do hope he is still alive. I know the memberships must be accepted. I don't see any reason why mine should not be. Well, that's my opinion !!! I have joined a lot of Yahoo groups in the past, it's the first time it happens. Did anybody experience such a delay in joining this particular group? Does anybody know what I could do to make the process a bit faster ? I just want to use tact and discretion ! Thanks in advance D. Kremp Normandy/France |
DK wrote:
I've been trying for 3 weeks to join the Grundig Satellit Yahoo group and my membership has been pending since 3 weeks ! I have sent some emails to the group moderator but he looks like being either blind or dumb. I do hope he is still alive. I know the memberships must be accepted. I don't see any reason why mine should not be. Well, that's my opinion !!! I have joined a lot of Yahoo groups in the past, it's the first time it happens. Did anybody experience such a delay in joining this particular group? Does anybody know what I could do to make the process a bit faster ? I just want to use tact and discretion ! Thanks in advance D. Kremp Normandy/France You need to bear in mind that some groups are private groups. And membership is by sponsored invitation only. There is no requirement that all membership applications be approved. The list owner is under no obligation to include any person who wishes to join. And often there is no reason to the approval process. In the case of this particular group, my own membership was by sponsored invitation, took only a couple of days and was accomplished with a couple of e-mails. In the case of this particular group, the list owner is often on the road, and may simply not be available for your application. This is his busy season. He and he alone may accept new members. So, you may simply be in a holding pattern until he returns. Then again, I resigned from this group nearly a year ago, so this information may be outdated. Inquire from the list owner. Be tactful. If you receive no response, inquire from another member if there's a problem. p |
In article ,
"DK" wrote: I've been trying for 3 weeks to join the Grundig Satellit Yahoo group and my membership has been pending since 3 weeks ! I have sent some emails to the group moderator but he looks like being either blind or dumb. I do hope he is still alive. I know the memberships must be accepted. I don't see any reason why mine should not be. Well, that's my opinion !!! I have joined a lot of Yahoo groups in the past, it's the first time it happens. Did anybody experience such a delay in joining this particular group? Does anybody know what I could do to make the process a bit faster ? I just want to use tact and discretion ! Thanks in advance Yeah, mine is "pending" also. It's been about 2 weeks since I tried to join. If this group is indeed by sponsored invitation only, then it should say so on the home page. Dan Drake R8, Radio Shack DX-440, Grundig Satellit 650, Satellit 700, YB400 Tecsun PL-230 (YB550PE), Kaito KA1102 Hallicraters S-120 (1962) Zenith black dial 5 tube Tombstone (1937) E. H. Scott 23 tube Imperial Allwave in Tasman cabinet (1936) |
DK,
Which eGroup on YAHOO ? * The Grundig Satellit Info Group @ Members 214 http://groups.yahoo.com/group/grundig_satellit/ * 650 · Grundig Radio Group For Connoisseurs @ Members 28 GS650= http://groups.yahoo.com/group/650/ * ETON E1 XM Radio {Grundig Satellit 900} @ Members 366 GS900= http://groups.yahoo.com/group/Grundig-Satellit-900/ http://groups.yahoo.com/group/ETON-E1-XM-Radio/ * Satellit800 · News, reviews, mods and suggestions on the Grundig Satellit 800 SW/AM/FM/VHF Air Receiver @ Members 678 GS800M= http://groups.yahoo.com/group/Satellit800/ * "grundigtransistorradio" @ Members 5? NOTE: Sorry, this group is available to members ONLY. You are not allowed to access this group. LISTs for 'grundig' on YAHOO eGroups http://groups.yahoo.com/search?query=grundig&ss=1 http://groups.yahoo.com/search?query...=-1&sg=10&ss=1 http://groups.yahoo.com/search?query...=-1&sg=20&ss=1 hth ~ RHF = = = "DK" wrote in message = = = ... I've been trying for 3 weeks to join the Grundig Satellit Yahoo group and my membership has been pending since 3 weeks ! I have sent some emails to the group moderator but he looks like being either blind or dumb. I do hope he is still alive. I know the memberships must be accepted. I don't see any reason why mine should not be. Well, that's my opinion !!! I have joined a lot of Yahoo groups in the past, it's the first time it happens. Did anybody experience such a delay in joining this particular group? Does anybody know what I could do to make the process a bit faster ? I just want to use tact and discretion ! Thanks in advance D. Kremp Normandy/France .. |
"DK" wrote in message ... I've been trying for 3 weeks to join the Grundig Satellit Yahoo group and my membership has been pending since 3 weeks ! I have sent some emails to the group moderator but he looks like being either blind or dumb. I do hope he is still alive. I know the memberships must be accepted. I don't see any reason why mine should not be. Well, that's my opinion !!! I have joined a lot of Yahoo groups in the past, it's the first time it happens. Did anybody experience such a delay in joining this particular group? Does anybody know what I could do to make the process a bit faster ? I just want to use tact and discretion ! Thanks in advance D. Kremp Normandy/France I ran into the same thing about a year ago, And was refused membership !!!?...I hate to say this but I think he has some prejudices regarding the country of origin. The reason are never stated, of course but I have never run into this, in any other group I have applied to join . I wouldn't lose too much sleep over it :-)). BMC |
= = = Dan wrote in message
= = = ... In article , (RHF) wrote: DK, Which eGroup on YAHOO ? * The Grundig Satellit Info Group @ Members 214 http://groups.yahoo.com/group/grundig_satellit/ This one. DK & DAN, Related to the "Grundig Satellit Info Group" @ Members 214 http://groups.yahoo.com/group/grundig_satellit/ NOTE: For more information: http://www.classic-worldband.com Grundig Satellit "Classic World Band" Radios http://www.classic-worldband.com/index.html http://www.geocities.com/grundig_satellit/ - presented by Knut Otterbeck eMail= hth ~ RHF .. .. Dan Drake R8, Radio Shack DX-440, Grundig Satellit 650, Satellit 700, YB400 Tecsun PL-230 (YB550PE), Kaito KA1102 Hallicraters S-120 (1962) Zenith black dial 5 tube Tombstone (1937) E. H. Scott 23 tube Imperial Allwave in Tasman cabinet (1936) .. |
Dan wrote in message ...
In article , "DK" wrote: I've been trying for 3 weeks to join the Grundig Satellit Yahoo group and my membership has been pending since 3 weeks ! I have sent some emails to the group moderator but he looks like being either blind or dumb. I do hope he is still alive. I know the memberships must be accepted. I don't see any reason why mine should not be. Well, that's my opinion !!! I have joined a lot of Yahoo groups in the past, it's the first time it happens. Did anybody experience such a delay in joining this particular group? Does anybody know what I could do to make the process a bit faster ? I just want to use tact and discretion ! Thanks in advance Yeah, mine is "pending" also. It's been about 2 weeks since I tried to join. If this group is indeed by sponsored invitation only, then it should say so on the home page. Dan Drake R8, Radio Shack DX-440, Grundig Satellit 650, Satellit 700, YB400 Tecsun PL-230 (YB550PE), Kaito KA1102 Hallicraters S-120 (1962) Zenith black dial 5 tube Tombstone (1937) E. H. Scott 23 tube Imperial Allwave in Tasman cabinet (1936) Similar thing happened to me but my "application" came back rejected.... period. Must not like the way I cross my t's. |
"Brian Colwell" wrote in message news:Afocc.33611$oR5.19788@pd7tw3no... "DK" wrote in message ... I've been trying for 3 weeks to join the Grundig Satellit Yahoo group and my membership has been pending since 3 weeks ! I have sent some emails to the group moderator but he looks like being either blind or dumb. I do hope he is still alive. I know the memberships must be accepted. I don't see any reason why mine should not be. Well, that's my opinion !!! I have joined a lot of Yahoo groups in the past, it's the first time it happens. Did anybody experience such a delay in joining this particular group? Does anybody know what I could do to make the process a bit faster ? I just want to use tact and discretion ! Thanks in advance D. Kremp Normandy/France I ran into the same thing about a year ago, And was refused membership !!!?...I hate to say this but I think he has some prejudices regarding the country of origin. The reason are never stated, of course but I have never run into this, in any other group I have applied to join . I wouldn't lose too much sleep over it :-)). BMC I doubt it's anything as sinister as that. I think that it is much more likely that you got rejected due to anti-spam measures gone wrong. Recently, I noticed the moderator of the SW77 group mentioned that about 20% of the applications for his group were spam-related. He sends out an e-mail that you have to reply as a short note back, and you're in. Some of the automated anti-spam measures on Yahoo Groups have been known to go on the fritz as well. If you included an "anti-spam measure" like you did (smartly) in your usenet address in the post above, then the automated measures (or an admin not paying attention) would get a bounced note and not let you in. I suggest you re-apply using this method for dealing with Yahoo Groups: First, open yourself a free Yahoo mail account. Then use that account to apply for the admission to the group (after all, you could care less if it gets spammed). Just be sure to check it until you're in. -- Stinger |
Thank you everybody for the comments & advices
Now wait and see ... DK DK wrote: I've been trying for 3 weeks to join the Grundig Satellit Yahoo group and my membership has been pending since 3 weeks ! I have sent some emails to the group moderator but he looks like being either blind or dumb. I do hope he is still alive. I know the memberships must be accepted. I don't see any reason why mine should not be. Well, that's my opinion !!! I have joined a lot of Yahoo groups in the past, it's the first time it happens. Did anybody experience such a delay in joining this particular group? Does anybody know what I could do to make the process a bit faster ? I just want to use tact and discretion ! Thanks in advance D. Kremp Normandy/France |
"Stinger" wrote in message ... "Brian Colwell" wrote in message news:Afocc.33611$oR5.19788@pd7tw3no... "DK" wrote in message ... I've been trying for 3 weeks to join the Grundig Satellit Yahoo group and my membership has been pending since 3 weeks ! I have sent some emails to the group moderator but he looks like being either blind or dumb. I do hope he is still alive. I know the memberships must be accepted. I don't see any reason why mine should not be. Well, that's my opinion !!! I have joined a lot of Yahoo groups in the past, it's the first time it happens. Did anybody experience such a delay in joining this particular group? Does anybody know what I could do to make the process a bit faster ? I just want to use tact and discretion ! Thanks in advance D. Kremp Normandy/France I ran into the same thing about a year ago, And was refused membership !!!?...I hate to say this but I think he has some prejudices regarding the country of origin. The reason are never stated, of course but I have never run into this, in any other group I have applied to join . I wouldn't lose too much sleep over it :-)). BMC I doubt it's anything as sinister as that. I think that it is much more likely that you got rejected due to anti-spam measures gone wrong. Recently, I noticed the moderator of the SW77 group mentioned that about 20% of the applications for his group were spam-related. He sends out an that you have to reply as a short note back, and you're in. Some of the automated anti-spam measures on Yahoo Groups have been known to go on the fritz as well. If you included an "anti-spam measure" like you did (smartly) in your usenet address in the post above, then the automated measures (or an admin not paying attention) would get a bounced note and not let you in. I suggest you re-apply using this method for dealing with Yahoo Groups: First, open yourself a free Yahoo mail account. Then use that account to apply for the admission to the group (after all, you could care less if it gets spammed). Just be sure to check it until you're in. -- Stinger Thanks for your reply, I never thought much about it at the time, I could be mistaken, but some time later I thought there were some threads of a political nature regarding the administrator of that n/g. but any rate, your explanation seems more logical. Regards, BMC |
|
Michael Bryant wrote: From: "Brian Colwell" Thanks for your reply, I never thought much about it at the time, I could be mistaken, but some time later I thought there were some threads of a political nature regarding the administrator of that n/g. but any rate, your explanation seems more logical. Logic has little meaning when dealing with JJ, administrator of the SAT800 group. He's certifiably insane. And you Fat Boy? What are you? Anyone who tries to inflate their personal standing by stating that they have a PhD when indeed they do not have one certainly has some problems! Wouldn't you agree? |
|
Michael Bryant wrote: From: N8KDV And you Fat Boy? What are you? Anyone who tries to inflate their personal standing by stating that they have a PhD when indeed they do not have one certainly has some problems! Wouldn't you agree? Steve, try taking your meds. Maybe, then, you can remember the day you lost your job. I think some interesting archival material would cast doubt on your honesty. BTW, you've never proven I don't have a PhD. Whether I do or not, why is it such a big obsession of yours? Get a grip. You've lost it. Find it. Awaiting your elementary-style school bully routine, You're getting pretty pathetic! |
|
|
Michael Bryant wrote: From: N8KDV You're getting pretty pathetic! Stick to fighting with me in the designated off-topic threads and quit polluting any thread where I make a post. Stop bothering other people with your obsessive need to act like a 2nd grade bully. Your SW info is good, but your maturity is pretty damn low. Even more pathetic! |
In article ,
N8KDV wrote: Michael Bryant wrote: From: "Brian Colwell" Thanks for your reply, I never thought much about it at the time, I could be mistaken, but some time later I thought there were some threads of a political nature regarding the administrator of that n/g. but any rate, your explanation seems more logical. Logic has little meaning when dealing with JJ, administrator of the SAT800 group. He's certifiably insane. And you Fat Boy? What are you? Anyone who tries to inflate their personal standing by stating that they have a PhD when indeed they do not have one certainly has some problems! Wouldn't you agree? Sorry Steve Bryant wins this one. He is an expert on insanity and certified by the many posts he has made. -- Telamon Ventura, California |
Brian Colwell wrote:
Thanks for your reply, I never thought much about it at the time, I could be mistaken, but some time later I thought there were some threads of a political nature regarding the administrator of that n/g. but any rate, your explanation seems more logical. Regards, BMC I bet that this is the 6 week cycle for JJ--and he's off the meds again I wish you the best of luck in finding ANYTHING of use in that group. It really seems to be a personal rant group for JJ (Woody). |
Michael Bryant wrote: From: N8KDV And you Fat Boy? What are you? Anyone who tries to inflate their personal standing by stating that they have a PhD when indeed they do not have one certainly has some problems! Wouldn't you agree? Steve, try taking your meds. Maybe, then, you can remember the day you lost your job. I think some interesting archival material would cast doubt on your honesty. Then go find it Fat Boy! You make the same petty threats over, and over, and over again! BTW, you've never proven I don't have a PhD. BTW, you lied about having a PhD when you did not! That IS in the archives! Whether I do or not, why is it such a big obsession of yours? No big obsession, just that it's more proof that you are a liar and a fabricator! |
Michael Bryant wrote: From: N8KDV And you Fat Boy? What are you? Anyone who tries to inflate their personal standing by stating that they have a PhD when indeed they do not have one certainly has some problems! Wouldn't you agree? BTW, you've never proven I don't have a PhD. Perhaps, but it has been proven that you lied about having one when you yourself admitted it was not granted! Now, the ball is in your court to actually PROVE that you do indeed have a PhD. Where is it from? When was it granted? When did you attend the school from which it was granted? I'm guessing that you don't! |
On Fri, 09 Apr 2004 07:10:11 -0400, N8KDV
wrote: Michael Bryant wrote: From: N8KDV And you Fat Boy? What are you? Anyone who tries to inflate their personal standing by stating that they have a PhD when indeed they do not have one certainly has some problems! Wouldn't you agree? BTW, you've never proven I don't have a PhD. Perhaps, but it has been proven that you lied about having one when you yourself admitted it was not granted! Now, the ball is in your court to actually PROVE that you do indeed have a PhD. Where is it from? When was it granted? When did you attend the school from which it was granted? I'm guessing that you don't! It really boggles the mind. It really does. |
|
Michael Bryant wrote: From: B Banton It really boggles the mind. It really does. No, what really boggles the mind, is why Steve Lare keeps bringing up this crap in every thread where I make a post. I'll be happy to answer any questions regarding my graduate education the day that Steve tells us when he ceased to be employed. LOL, what difference does it make Fat Boy? You see I'm honest! When I stated I had a job I had one! When I stated I didn't have a job I didn't! Now what does that have to do with your nonexistent PhD? Your just making your typical excuses! That's normal for a liar and fabricator, and you continue to show us every day! You see, I've got dozens of posts where Steve swears he had a job despite the fact that I was pointing out that he was posting 24/7. He swore up and down he had a job. Now he admits he doesn't have one. You figure it out. I guess consistency is too much to expect from someone with an investing degree from Grand Valley State. BTW, Steve, Grand Valley's current catalogue doesn't list an "investment degree." Like to try again? Sure thing Fat Boy! I have a degree in Business Administration, my major emphasis was in investments and securities. I have nothing whatsoever to do with Grand Valley's current catalogue. I received my degree in 1985. Truly boggling. BTW, you're real name is Tracy Fort, right? No, but your real name is Liar and Fabricator! We all know that! |
On Fri, 09 Apr 2004 14:28:30 -0400, N8KDV
wrote: Michael Bryant wrote: From: B Banton It really boggles the mind. It really does. No, what really boggles the mind, is why Steve Lare keeps bringing up this crap in every thread where I make a post. I'll be happy to answer any questions regarding my graduate education the day that Steve tells us when he ceased to be employed. LOL, what difference does it make Fat Boy? You see I'm honest! When I stated I had a job I had one! When I stated I didn't have a job I didn't! Now what does that have to do with your nonexistent PhD? Your just making your typical excuses! That's normal for a liar and fabricator, and you continue to show us every day! You see, I've got dozens of posts where Steve swears he had a job despite the fact that I was pointing out that he was posting 24/7. He swore up and down he had a job. Now he admits he doesn't have one. You figure it out. I guess consistency is too much to expect from someone with an investing degree from Grand Valley State. BTW, Steve, Grand Valley's current catalogue doesn't list an "investment degree." Like to try again? Sure thing Fat Boy! I have a degree in Business Administration, my major emphasis was in investments and securities. I have nothing whatsoever to do with Grand Valley's current catalogue. I received my degree in 1985. Truly boggling. BTW, you're real name is Tracy Fort, right? No, but your real name is Liar and Fabricator! We all know that! I don't think you have a job either. And that boggles the mind. It simply boggles my brain big time. How do you eat? |
On 09 Apr 2004 18:00:27 GMT, ocom (Michael Bryant)
wrote: From: B Banton It really boggles the mind. It really does. No, what really boggles the mind, is why Steve Lare keeps bringing up this crap in every thread where I make a post. I'll be happy to answer any questions regarding my graduate education the day that Steve tells us when he ceased to be employed. You see, I've got dozens of posts where Steve swears he had a job despite the fact that I was pointing out that he was posting 24/7. He swore up and down he had a job. Now he admits he doesn't have one. You figure it out. I guess consistency is too much to expect from someone with an investing degree from Grand Valley State. BTW, Steve, Grand Valley's current catalogue doesn't list an "investment degree." Like to try again? Truly boggling. BTW, you're real name is Tracy Fort, right? More boggling. Michael Bryant, WA4009SWL Louisville, KY R75, S800, RX320, SW77, ICF2010K, DX398, 7600G, 6800W, RF2200, 7600A GE SRll, Pro-2006, Pro-2010, Pro-76 (remove "nojunk" to reply) Why would you think that Mike? Tracy |
Tracy Fort wrote: On 09 Apr 2004 18:00:27 GMT, ocom (Michael Bryant) wrote: From: B Banton It really boggles the mind. It really does. No, what really boggles the mind, is why Steve Lare keeps bringing up this crap in every thread where I make a post. I'll be happy to answer any questions regarding my graduate education the day that Steve tells us when he ceased to be employed. You see, I've got dozens of posts where Steve swears he had a job despite the fact that I was pointing out that he was posting 24/7. He swore up and down he had a job. Now he admits he doesn't have one. You figure it out. I guess consistency is too much to expect from someone with an investing degree from Grand Valley State. BTW, Steve, Grand Valley's current catalogue doesn't list an "investment degree." Like to try again? Truly boggling. BTW, you're real name is Tracy Fort, right? More boggling. Michael Bryant, WA4009SWL Louisville, KY R75, S800, RX320, SW77, ICF2010K, DX398, 7600G, 6800W, RF2200, 7600A GE SRll, Pro-2006, Pro-2010, Pro-76 (remove "nojunk" to reply) Why would you think that Mike? First mistake there Tracy! Mike doesn't think! He fabricates! |
Tracy Fort wrote: Truly boggling. BTW, you're real name is Tracy Fort, right? More boggling. Michael Bryant, WA4009SWL Louisville, KY R75, S800, RX320, SW77, ICF2010K, DX398, 7600G, 6800W, RF2200, 7600A GE SRll, Pro-2006, Pro-2010, Pro-76 (remove "nojunk" to reply) Why would you think that Mike? First mistake there Tracy! Mike doesn't think! He fabricates! I was trying to play nice and not reply to his posts. I really don't like to killfile because you might miss something good. It's funny. He must think that we are posting as one another. I guess he can't figure out how to read a header. Heck, he's still trying to figure out if his PhD has been conferred upon him or not! |
Truly boggling. BTW, you're real name is Tracy Fort, right? More boggling. Michael Bryant, WA4009SWL Louisville, KY R75, S800, RX320, SW77, ICF2010K, DX398, 7600G, 6800W, RF2200, 7600A GE SRll, Pro-2006, Pro-2010, Pro-76 (remove "nojunk" to reply) Why would you think that Mike? First mistake there Tracy! Mike doesn't think! He fabricates! I was trying to play nice and not reply to his posts. I really don't like to killfile because you might miss something good. It's funny. He must think that we are posting as one another. I guess he can't figure out how to read a header. Tracy |
| All times are GMT +1. The time now is 11:25 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
RadioBanter.com