| Home |
| Search |
| Today's Posts |
|
#2
April 25th 04, 03:06 PM
|
|||
|
|||
This may sound like a stupid question but...
You DO have it turned ON all the way and not OFF? COUNTER-CLOCKWISE is on full... "Bunia3" wrote in message ... just aquired a used radioshack DX 398--works well except the sensitivty is low (sounds like an attenuator is switched in!!)...are there things to check/modifications etc to improve the sensitivity of this radio? i am running the attenuator knob at the full gain posiiton. radio wld be fantastic IF I could improve its sensitivity/gain. As stands--my SONY 7600/YachtBoy 400 etc absolutely blow it away..i dont think this is a normal situation, so i suspect the dx 398 has a problem. thanx for all suggestions/links to web sites dealing with this issue. ed s |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Scanner sensitivity and path loss? | Antenna | |||
| Improving antenna sensitivity by jury-rigging | Antenna | |||
| Sangean WR 1 ... MW sensitivity? | Shortwave | |||
| meter sensitivity versus internal resistance | Homebrew | |||
| meter sensitivity versus internal resistance | Homebrew | |||
Threaded Mode
