Home |
Search |
Today's Posts |
#8
![]() |
|||
|
|||
![]() Curmudgeon wrote: On Sat, 03 Jul 2004 07:21:16 -0400, dxAce wrote: starman wrote: When you dis-assemble the radio make sure you get the connectors back in the proper spots, and be very careful with the display. There is very little disassembling to do. The only connector that has to be removed from the PC board is the encoder wiring harness plug. It doesn't involve anything with the display other than removing the clear plastic window in front of the display, which comes off with the front black panel. It might help to remove the screws which hold the front chassis panel (under the front black panel) to the main chassis, so you can pull the front chassis panel forward a little to gain better access to the encoder from the bottom. There is enough slack in the other wiring harnesses to do this without removing more wiring connectors. Depends upon the amount of disassembly one wishes to do. But if one does start removing connectors, make sure they go back on properly. Bottom line: Just be very careful. DxAss knows all about bottom lines: He has to be very careful. If he is not careful then he will get SPNAKED again by ISERV as he did again just recently. LOLOL Really? That's certainly news to me. Thanks for the update, 'tard. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Drake AC-4 question -- with a vital correction made! | Boatanchors | |||
Drake AC-4 question -- with a vital correction made! | Equipment | |||
Drake AC-4 question (silly?) | Boatanchors | |||
Drake AC-4 question (silly?) | Equipment | |||
Drake AC-4 question (silly?) | Equipment |