Numpty wrote:

Hi, I have got an Icom IC-R8500 and I want to decode Morse, RTTY etc, what I
want to know is, is there a step by step guide on how to do this I know I
will need a cable going into my soundcard and software.

Where can I get a cable and what sort.

What software will I need

I'm in the Uk

Hope someone can help as I find this interesting..

Many thanks

Dean

Hi

The cord you'll want will have a connector that fits the headphone or speaker output jack on your radio (probably 1/4" or 1/8") and a 1/8" miniplug on the other end.

Here is a link to a web site with a variety of software programs:

http://www.csun.edu/~vfeen0br/johnpage/rttysoft.html

Newbie Help
 

Hi, I have got an Icom IC-R8500 and I want to decode Morse, RTTY etc, what I
want to know is, is there a step by step guide on how to do this I know I
will need a cable going into my soundcard and software.

Where can I get a cable and what sort.

What software will I need

I'm in the Uk

Hope someone can help as I find this interesting..


Many thanks


Dean

Simply conect to REC OUT (second above PHONES) to LINE IN to your
soundcard. Two 3.5 mm stero phone plugs on each end. I bet you can find it
in any radioshack.

As for soft I recomend MixW2 http://mixw.net/ and some from digimode
decoding from www.dxsoft.com (TrueTTY, SeaTTY, CWGet)
I tested these works fine with good-averande signals giving understandable
results.

good luck,
Edgaras
SWL 73!

thanks for the replies guys will check the sites out and get a lead..

Thanks again

Dean


"Edgar" wrote in message
...
Simply conect to REC OUT (second above PHONES) to LINE IN to your
soundcard. Two 3.5 mm stero phone plugs on each end. I bet you can find
it
in any radioshack.

As for soft I recomend MixW2 http://mixw.net/ and some from digimode
decoding from www.dxsoft.com (TrueTTY, SeaTTY, CWGet)
I tested these works fine with good-averande signals giving understandable
results.

good luck,
Edgaras
SWL 73!