About Us

October 9th 04, 04:55 PM

Terry wrote:

(Steve) wrote in message . com...

When I go to Rat Shack's website, the only standoff insulators I find
are for attaching to masts or screwing into wood. What if you need to
attach standoff insulators to concrete or masonry? Anyone have any
suggestions? I'd like to find some....preferably some that don't do a
lot of damage to the surfaces they attach to.

Steve

I have used tow slightly different way to mount standoffs on
concrete or brick surfaces.
The first is to make my own standoffs from 1/2" PVC pipe and just
use GE silicon aquarium seal to clue the pipes upright. You have to
use tape to hold them vertical overnight.
The other is to mount store-bought standoffs on a 3~4" piece of
plastic and glue the plastic square with silicon.
Both work well and are easy to remove and leave minimum traces.
You can scrub the residuel silicon fairly easily.
A acrylic adheeive might work as well and be easier to clean up.
Terry

You can also use 1/4" lead anchors (this is bolt size. OD is probably
about 1/2") with the PVC pipe to get a good solid standoff. Just recess
the anchors enough that you can put a dab of concrete over them if you
should ever remove the standoff.

Thread Tools	Search this Thread
Show Printable Version	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NOS Porcelain 2 piece feedthrough insulators	Lew/ K1NDV	Boatanchors	0	November 26th 04 06:21 PM
NOS Porcelain feedthrough insulators	Lew/ K1NDV	Equipment	0	November 9th 04 06:07 PM
NOS Porcelain feedthrough insulators	Lew/ K1NDV	Equipment	0	November 9th 04 06:07 PM
NOS Porcelain Insulators	Lew/ K1NDV	Equipment	0	November 1st 04 06:11 PM
Feed Through Insulators?	zeno	Antenna	10	May 1st 04 06:50 PM

Menu

About Us