| Home |
| Search |
| Today's Posts |
|
|
|
#1
|
|||
|
|||
|
Van Rossman was instructed to keep his TV turned off or face fines of
up to $10,000 per day for emitting a false distress signal. --------------------------------------------------- and wide frequency range scanners are bound to have the local oscillator to transmit on such a frequency if you set your scanner to a certain frequency to listen to. But it's always the consumers who get into trouble and never the manufacturers who get into trouble. |
|
#2
|
|||
|
|||
|
wrote in message ... Van Rossman was instructed to keep his TV turned off or face fines of up to $10,000 per day for emitting a false distress signal. --------------------------------------------------- and wide frequency range scanners are bound to have the local oscillator to transmit on such a frequency if you set your scanner to a certain frequency to listen to. True, and some of those LO's can be quite strong, regardless of supposedly being regulated by Part 15 rules. I had a Bearcat BC-250 scanner back when they were new that if I set it just to the right frequency, I could open a ham repeater three miles away with the LO. |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| That pesky 7238 kHz CW signal | Homebrew | |||
| Poor quality low + High TV channels? How much dB in Preamp? | Antenna | |||
| Poor quality low + High TV channels? How much dB in Preamp? | Shortwave | |||
| signal to noise ratio drops on connecting the antenna | Homebrew | |||
| signal to noise ratio drops on connecting the antenna | Homebrew | |||