RadioBanter

RadioBanter (https://www.radiobanter.com/)
-   Shortwave (https://www.radiobanter.com/shortwave/)
-   -   WTB: Select-A-Tenna (https://www.radiobanter.com/shortwave/46516-wtb-select-tenna.html)

Gary Brown November 26th 04 06:31 PM

WTB: Select-A-Tenna
 
Please state condition and price shipped to ZIP 27513.

Gary
K4GPB





David November 26th 04 08:06 PM

http://www.grove-ent.com/ANT21.html

On Fri, 26 Nov 2004 18:31:18 GMT, "Gary Brown"
wrote:

Please state condition and price shipped to ZIP 27513.

Gary
K4GPB





Michael November 27th 04 05:02 AM

Always wondered how well these things worked? According the CC Crane Co.
they're the best innovation since 'Amplitude Modulation". Fine, but can any
real user chime in with some performance stats?

Seems to me that it's almost too good to be true, but once in a while a
great product does come out and is superb. So, any Select-A-Tenna users have
any opinions they wish to share? My brother wants a Sony AP1....might this
be a cost effective alternative. His use is near distant / local AM.

Thanks,
Mike T.

"David" wrote in message
...
http://www.grove-ent.com/ANT21.html

On Fri, 26 Nov 2004 18:31:18 GMT, "Gary Brown"
wrote:

Please state condition and price shipped to ZIP 27513.

Gary
K4GPB







[email protected] November 27th 04 05:14 AM

ccrane pedals JUNK! About six years ago I bought one of those $164.00
plastic ccrane JUNK radios that Art Ohhhh Myyyyyy Goddddd Bell and
George Afraid Of Ouija Boards Noory (George Noory actually doesn't know
how long he was in the Navy) tout so much and at the same time I bought
one of those round JUNK antenna thingys with the knob in the middle of
it.That piece of JUNK radio and that piece of JUNK antenna thingy didn't
show me anything at all.I packed that JUNKY plastic crap! back up and I
sent it back to those JUNK pedaling creeps! in Fortuna,California.STAY
AWAY FROM ANYTHING AND EVERYTHING ccrane pedals!
cuhulin


[email protected] November 27th 04 05:18 AM

I even tried out one of their top dollar Sangean shortwave radios.I sent
that crappy piece of JUNK! back to them too.I suppose ccrane JUNK!
pedaling company still has some sort of data in their JUNK! pedaling
computers or hard paper records that can prove what I am saying.
cuhulin


[email protected] November 27th 04 05:20 AM

An old saying goes,If It Sounds Too Good To Be True,It IS! Too Good To
Be True.
cuhulin


Tony Meloche November 27th 04 06:06 AM

Well, to take a slightly different view than "cuhulin":

The original "Select-a-tenna" is a good value if you are a dedicated
AM DX'er, IMO. It runs on *nothing* (completely passive) and will last
a lifetime. If positioned correctly, it is equally useful with loop or
ferrite bar antennas.
But it cannot do everything, and it does not do it's own thing equally
well in all circumstances. For example:

Nightime DX with a typical AM table radio - it is a help. It "cleans
up" distant stations perceptibly. When not DXing (just getting work
done) in the evenings, I like to listen to an AM station some 275 miles
distant. This is on an ordinary Sony tabletop stereo, hooked to a loop
antenna for AM. The Select-a-tenna cleans up the signal noticeably.

For DAYTIME DX on an AM radio, it is a HUGE help - sometimes it
borders on astonishing. I have seen it change "far fringe" (daytime) to
"local" signal quality on numerous occasions.

Generally, the more basic the AM radio, the better it works with it.
It does not "boost" the signal so much as it "funnels" the signal more
directly to the receiver. Nighttime, it makes a differnce. Daytime, it
makes a big difference.

I've owned one for years - well worth the $45 I paid for it. YMMV,
of course.

Tony

Craig \(WB6LZV\) November 27th 04 06:15 AM

A very good appraisal. My experiences have been similar. I inherited one
from my grandfather who passed away 15 years go... and he had been using it
for at least 10 years before that. Well worth the $35 he paid for it back
in the '70s.

"Tony Meloche" wrote in message
...
Well, to take a slightly different view than "cuhulin":

The original "Select-a-tenna" is a good value if you are a dedicated
AM DX'er, IMO. It runs on *nothing* (completely passive) and will last
a lifetime. If positioned correctly, it is equally useful with loop or
ferrite bar antennas.
But it cannot do everything, and it does not do it's own thing equally
well in all circumstances. For example:

Nightime DX with a typical AM table radio - it is a help. It "cleans
up" distant stations perceptibly. When not DXing (just getting work
done) in the evenings, I like to listen to an AM station some 275 miles
distant. This is on an ordinary Sony tabletop stereo, hooked to a loop
antenna for AM. The Select-a-tenna cleans up the signal noticeably.

For DAYTIME DX on an AM radio, it is a HUGE help - sometimes it
borders on astonishing. I have seen it change "far fringe" (daytime) to
"local" signal quality on numerous occasions.

Generally, the more basic the AM radio, the better it works with it.
It does not "boost" the signal so much as it "funnels" the signal more
directly to the receiver. Nighttime, it makes a differnce. Daytime, it
makes a big difference.

I've owned one for years - well worth the $45 I paid for it. YMMV,
of course.

Tony




nitespark November 27th 04 10:59 AM



Michael wrote:

Always wondered how well these things worked? According the CC Crane Co.
they're the best innovation since 'Amplitude Modulation". Fine, but can any
real user chime in with some performance stats?

Seems to me that it's almost too good to be true, but once in a while a
great product does come out and is superb. So, any Select-A-Tenna users have
any opinions they wish to share? My brother wants a Sony AP1....might this
be a cost effective alternative. His use is near distant / local AM.


I have one and will tell you they are HIGHLY EFFECTIVE. All you need do
is set it next to just about any AM radio with an internal antenna and
tune it to the frequency where you want to listen and you will hear
stations CLEARLY that you couldn't even detect before.

Not only that, they can improve the selectivity of the AM radio. The
station I am listening to is about 25 miles south of where I live and
runs 1000 watts (I think). I cannot hear it at all without the
Select-a-tenna. However, there is a 10,000 watt station 20khz lower
about 2-3 miles from where I live. With careful tuning of both the
radio and the Select-a-tenna, I can easily hear the lower power station
25 miles away, and eliminate the closer higher power station on an
inexpensive AM radio.

Gary Brown November 27th 04 12:28 PM

I found one!..and there's 6 more on eBay right now.

Amazon also has 5 reviews of the similar Terk AM Advantage

Gary
K4GPB




David November 27th 04 02:56 PM

C Crane is a bit pricey but their service is excellent and the people
are very nice. Sangean has made legendary radios and I enjoy one of
them on a daily basis. While the CCR may be too much for you they
apparently satisfy somebody or they'd quit making them.

Terk also makes a Select-A-Tenna-like device (looks less likely to
fall over).

http://www.crutchfield.com/S-2G17Ebh...sp?i=209AM1000

On Fri, 26 Nov 2004 23:20:04 -0600, wrote:

An old saying goes,If It Sounds Too Good To Be True,It IS! Too Good To
Be True.
cuhulin



CW November 27th 04 03:00 PM

The difference it makes is substantial. You can make one quite easily if you
dont want to buy one. BTW, they are not a ne product having been around in
one form or another for over 50 years.

"Michael" wrote in message
...
Always wondered how well these things worked? According the CC Crane Co.
they're the best innovation since 'Amplitude Modulation". Fine, but can

any
real user chime in with some performance stats?

Seems to me that it's almost too good to be true, but once in a while a
great product does come out and is superb. So, any Select-A-Tenna users

have
any opinions they wish to share? My brother wants a Sony AP1....might this
be a cost effective alternative. His use is near distant / local AM.

Thanks,
Mike T.

"David" wrote in message
...
http://www.grove-ent.com/ANT21.html

On Fri, 26 Nov 2004 18:31:18 GMT, "Gary Brown"
wrote:

Please state condition and price shipped to ZIP 27513.

Gary
K4GPB









CW November 27th 04 03:03 PM

I rebuilt my system lately, Prior to that, I had the entire WebTV domain
blocked as nothing intelligent ever came from there. I see things haven't
changed.
wrote in message
...
ccrane pedals JUNK! About six years ago I bought one of those $164.00
plastic ccrane JUNK radios that Art Ohhhh Myyyyyy Goddddd Bell and
George Afraid Of Ouija Boards Noory (George Noory actually doesn't know
how long he was in the Navy) tout so much and at the same time I bought
one of those round JUNK antenna thingys with the knob in the middle of
it.That piece of JUNK radio and that piece of JUNK antenna thingy didn't
show me anything at all.I packed that JUNKY plastic crap! back up and I
sent it back to those JUNK pedaling creeps! in Fortuna,California.STAY
AWAY FROM ANYTHING AND EVERYTHING ccrane pedals!
cuhulin




[email protected] November 27th 04 05:11 PM

I own a Velocity Micro $1,290.00 ProMagix tower computer I bought from
www.velocitymicro.com in Febuary of this,year 2004.It is a very nice
custom built computer and I have a 22 inch screen NEC Multisync computer
monitor which I bought from www.tigerdirect.com for my computer too.I
have been subscribing to msntv (formerly webtv) since October 1999.I
enjoy my computer and my msntv service.There isn't anything wrong with
that as far as I can see.And msntv does not suck either.In two or three
months I intend to get my computer off of dial up and get on Starband
satellite internet access.I never use my computer for emailing or going
into chat rooms.I bought my computer mostly to do World War Two gaming.
cuhulin



[email protected] November 27th 04 05:15 PM

I would like to find some simple plans somewhere of how to build an
effective indoor antenna for AM radio.
cuhulin


Yodar November 27th 04 06:00 PM

wrote:
I would like to find some simple plans somewhere of how to build an
effective indoor antenna for AM radio.
cuhulin

from a Ham on another list whose handle is Bear

The Incredible Almost Ready to Patent Pizza Loop is operational!

15 turns of #24 around the perimeter of a 14" Papa John's Pizza box.
Two sections of the polyvaricap in parallel (about 500 pF) and it's
tuning just past both ends of the AM BC band. Nice sharp tuning and a
good null. Gotta play with the coupling loop. Started out with one
turn on the perimeter of the box... way too much signal for the Sony
to handle. Cut it down to 4" diameter centered in the box... not
quite enough coupling on the high end of the band. Now have it at
roughly 7" diameter and just a bit too much coupling. Gonna have to
play with it but I'll probably wait until after nightfall. Might have
to put a 100k potentiometer across the coupling loop to use as an
attenuator.

'Bear' NH7SR

CW November 27th 04 07:03 PM

Try Google. They're all over the net.

wrote in message
...
I would like to find some simple plans somewhere of how to build an
effective indoor antenna for AM radio.
cuhulin





All times are GMT +1. The time now is 02:07 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
RadioBanter.com