Home |
Search |
Today's Posts |
#11
![]() |
|||
|
|||
![]()
I'm not complaining, or have any problems with your article. I also
didn't read it before writing the post, although I think I have read it some time in the past. The reason I bring it up, is some seem to get the idea that the antennas themselves are "quieter". As far as local noise, and decoupling, I don't consider adding decoupling to an antenna, as making it "low noise", even though that may be an end result. I just consider that as allowing the antenna to work properly, without the feedline becoming part of the antenna. All my antennas are decoupled, and I consider *none* of them as being "low noise" antennas. I have no interest in writing articles per say. I "write" up my approaches to this, right here on usenet. As far as "incomplete" antennas, I don't spend much time thinking about them, as I don't use them. I mean, if you look at the title, "Noise reducing antennas", it's very misleading to some. Or could be. There is no such thing. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Icom 746pro Testimonial | Shortwave | |||
Transformer for longwire antennas to reduce noise problem? | Antenna | |||
Transformer for longwire antennas to reduce noise problem? | Shortwave | |||
Transformer for longwire antennas to reduce noise problem? | Shortwave | |||
Automatic RF noise cancellation and audio noise measurement | Homebrew |