Lucky wrote:

I was checking the inside of my Frg-7 and found some dust on the PCB and
components. I would like to clean it off with something.

Can anyone please recommend something? Is plain spray on contact cleaner
safe to use on the components too?

Thanks
Lucky


Go down the makeup aisle in your local pharmacy and find a large
size "blusher brush". Handiest little duster in the world. It is soft
enough to use on electrical components, but will really do the job.
Either blow off disloged dust with your breath, or hold the nozzle
attachment of a vacuum cleaner about 2" from the board while dusting it.

Spray electrical contact cleaner is available through most large
retailers and hardware outlets. RatShack sells it, too, but it's a lot
more expensive (for essentially the same product).

Tony