Hello Group,

I'm thinking about purchasing the TEC RX-320.
I've owned the Drake SW8 which had a great sideband selectable sync detector.

My question:

How does the TEC RX-320 handle distortion caused by the fading signals?

Dxr75 wrote:
Hello Group,

I'm thinking about purchasing the TEC RX-320.
I've owned the Drake SW8 which had a great sideband selectable sync
detector.

My question:

How does the TEC RX-320 handle distortion caused by the fading
signals?



It doesn't. The RX-320 has no sync detector so manual ECSS is the only way
to handle deep fade distortion. The receiver is very stable, however so
ECCS works very well in my experience. There are some very powerful
software packages available for the 320.

--
Brian Denley
http://home.comcast.net/~b.denley/index.html

Brian Denley wrote:

Dxr75 wrote:
Hello Group,

I'm thinking about purchasing the TEC RX-320.
I've owned the Drake SW8 which had a great sideband selectable sync
detector.

My question:

How does the TEC RX-320 handle distortion caused by the fading
signals?

It doesn't. The RX-320 has no sync detector so manual ECSS is the only way
to handle deep fade distortion. The receiver is very stable, however so
ECCS works very well in my experience. There are some very powerful
software packages available for the 320.

When using ECSS on the 320, how well can you reject adjacent channel
interference (filtering) without degrading the audio quality? Can you
also notch out a 5-Khz het' at the same time?


----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 100,000 Newsgroups
---= East/West-Coast Server Farms - Total Privacy via Encryption =---