wrote:

Klaus Köhler - Thüringen wrote:

I am looking for DX-Software and DX-Hardware for my COMMODORE 128 (

also for

the C-64-mode ).

KK


- Doubt if it has sufficient CPU power to do much...
you might try writing some yourself & see....

DX hardware for a commie... ?? dunno


I had a really small basic program for the Vic-20 and C-64 that would
do a respectable job of Decoding Morse. It couldn't have been more
than twenty lines long. There were also rtty decoders available.



http://www.mods.dk/view.php?ArticleId=1038


A really blurred schematic for an interface is he

http://www.mfjenterprises.com/man/pdf/MFJ-1225.pdf


A mention of two CW programs are made he

http://64.233.167.104/search?q=cache...download&hl=en

OR:

http://tinyurl.com/5736e

The above site is being worked on, so I posted the cached version.
A huge list of sites, referred to by the previous page:
http://www.geocities.com/CapeCanaver...x/hammisc2.htm


This site has a morse/Telex decoder program forthe Vic.
http://www.funet.fi/pub/cbm/vic20/utilities/8k/

=============================
conrad-dcf77.d64.gz

Software für C64/C128 zum "DCF-77 Empfänger" von Conrad
Electronic (Deutschland). The DCF-77 is a radio signal that carries
the time of an atomic clock located in Braunschweig, Germany. Uploaded
by Christian Janoff.

packetradio/

This directory contains packet radio stuff for the C64. See
modem.gif for a schematic diagram. The software is packed using PK-Zip
on MS-DOS. Unpack it before transfering the files to your C64. These
files were uploaded by .
dc5doc_p.zip@ (link)
Documentation for the packet radio software (Digicom v5.00).
dc64v50.zip
The packet radio software.
digicom-5.00.txt.gz@ (link)
Documentation for Digicom v5.00 in another format.
modem.gif@ (link)
The schematic diagram for a packet radio interface.



ftp://ftp.funet.fi/pub/cbm/ALLFILES.html
=============================

Those old simple computers like the Comodore, Radio Shack Color
Computer, etc., will work fine as a dumb terminal along with a radio
modem or other decoding device. They just need a serial port, enough
processing power to load some kind of comm software and display basic
text. I used a Coco 16 that had been bumped to 64k and a faster clock
along with a tape drive, home brew RF modulator and a 40 character
screen. The CoCo worked great along with an AEA PK232MBX for several
RTTY modes and cw.


m II wrote:
wrote:

Klaus K=F6hler - Th=FCringen wrote:

I am looking for DX-Software and DX-Hardware for my COMMODORE 128 (

also for

the C-64-mode ).

KK


- Doubt if it has sufficient CPU power to do much...
you might try writing some yourself & see....

DX hardware for a commie... ?? dunno


I had a really small basic program for the Vic-20 and C-64 that would

do a respectable job of Decoding Morse. It couldn't have been more
than twenty lines long. There were also rtty decoders available.



http://www.mods.dk/view.php?ArticleId=3D1038


A really blurred schematic for an interface is he

http://www.mfjenterprises.com/man/pdf/MFJ-1225.pdf


A mention of two CW programs are made he


http://64.233.167.104/search?q=3Dcac...der.com/dave/=
+%22vic-20%22+morse+%2Bcw+download&hl=3Den

OR:

http://tinyurl.com/5736e

The above site is being worked on, so I posted the cached version.
A huge list of sites, referred to by the previous page:
http://www.geocities.com/CapeCanaver...x/hammisc2.htm


This site has a morse/Telex decoder program forthe Vic.
http://www.funet.fi/pub/cbm/vic20/utilities/8k/

=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D
conrad-dcf77.d64.gz

Software f=FCr C64/C128 zum "DCF-77 Empf=E4nger" von Conrad
Electronic (Deutschland). The DCF-77 is a radio signal that carries
the time of an atomic clock located in Braunschweig, Germany.
Uploaded
by Christian Janoff.

packetradio/

This directory contains packet radio stuff for the C64. See
modem.gif for a schematic diagram. The software is packed using
PK-Zip
on MS-DOS. Unpack it before transfering the files to your C64. These
files were uploaded by .
dc5doc_p.zip@ (link)
Documentation for the packet radio software (Digicom v5.00).
dc64v50.zip
The packet radio software.
digicom-5.00.txt.gz@ (link)
Documentation for Digicom v5.00 in another format.
modem.gif@ (link)
The schematic diagram for a packet radio interface.



ftp://ftp.funet.fi/pub/cbm/ALLFILES.html
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D

wrote in message
oups.com...

The CoCo worked great along with an AEA PK232MBX for several
RTTY modes and cw.

I had a DX302 hooked to a C128 and an AEA CP1, it worked pretty good, would
print it out as fast as it read it.

Wish I had seen this post several weeks ago because I was at an estate sale
about a week ago that had a bunch of Commodore gear. Wasn't interested so
didn't pay much attention but do recall a stack of 1571 drives. Rob Mills

I was pleasantly surprised at what could be done with just basic
equipment. There was a whole lot of satisfaction from just making it
all work. Saving files on the CoCo took for ever...even after I
upgraded from a tape drive to a single sided floppy drive. As much as
I have good memories about the "simpler times" I have to admit that
upgrading to a PC running windows made it easier to swap back and forth
between frequency lists and messages.

Rob Mills wrote:
wrote in message
oups.com...

The CoCo worked great along with an AEA PK232MBX for several
RTTY modes and cw.

I had a DX302 hooked to a C128 and an AEA CP1, it worked pretty good,
would
print it out as fast as it read it.

Wish I had seen this post several weeks ago because I was at an
estate sale
about a week ago that had a bunch of Commodore gear. Wasn't
interested so
didn't pay much attention but do recall a stack of 1571 drives. Rob
Mills