Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old May 8th 05, 03:10 PM
cooltube
 
Posts: n/a
Default FA: DIPOLE KIT FOR 40-10mtrs>Real Copper wire & Ceramic NR

No Bids @$10, gotta see.
http://cgi.ebay.com/ws/eBayISAPI.dll...e=STRK:MESE:IT


  #2   Report Post  
Old May 8th 05, 03:38 PM
dxAce
 
Posts: n/a
Default



cooltube wrote:

No Bids @$10, gotta see.
http://cgi.ebay.com/ws/eBayISAPI.dll...e=STRK:MESE:IT


As opposed to 'fake' copper wire?

dxAce
Michigan
USA


  #3   Report Post  
Old May 8th 05, 04:58 PM
yea right
 
Posts: n/a
Default

On Sun, 08 May 2005 10:38:40 -0400, dxAce wrote:



cooltube wrote:

No Bids @$10, gotta see.
http://cgi.ebay.com/ws/eBayISAPI.dll...e=STRK:MESE:IT


As opposed to 'fake' copper wire?

dxAce
Michigan


Most all copper wire on the market is soft draw and will break after a few
years of constant tension. Hard draw copper wire is very tough and robust.
I use 18g lamp safety wire. This is the thin copper wire that servers as
a safety ground and as a safety wire in case a link in the lamp chain
breaks in hanging chandeliers.
  #4   Report Post  
Old May 8th 05, 05:15 PM
David
 
Posts: n/a
Default

On Sun, 08 May 2005 09:58:48 -0600, yea right wrote:

On Sun, 08 May 2005 10:38:40 -0400, dxAce wrote:



cooltube wrote:

No Bids @$10, gotta see.
http://cgi.ebay.com/ws/eBayISAPI.dll...e=STRK:MESE:IT


As opposed to 'fake' copper wire?

dxAce
Michigan


Most all copper wire on the market is soft draw and will break after a few
years of constant tension. Hard draw copper wire is very tough and robust.
I use 18g lamp safety wire. This is the thin copper wire that servers as
a safety ground and as a safety wire in case a link in the lamp chain
breaks in hanging chandeliers.


I have 50' of thin braided copper wire from Home Depot that's been
under constant tension for 6 years 9 months. Enough tension to
deflect the top of a 20' support (two fence rails, a spike base and a
building clamp at 9') 2 to 3 inches.

  #5   Report Post  
Old May 8th 05, 03:42 PM
David
 
Posts: n/a
Default

On Sun, 8 May 2005 10:10:10 -0400, "cooltube"
wrote:

No Bids @$10, gotta see.
http://cgi.ebay.com/ws/eBayISAPI.dll...e=STRK:MESE:IT


That wire looks really fragile. Can you do it in steel? Braided
copper?



Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
FA: DIPOLE KIT FOR 40-10mtrs>Real Copper wire & Ceramic NR cooltube Equipment 10 May 17th 05 07:41 PM
FA: DIPOLE KIT FOR 40-10mtrs>Real Copper wire & Ceramic NR cooltube CB 14 May 17th 05 07:41 PM
FA: DIPOLE KIT FOR 40-10mtrs>Real Copper wire & Ceramic NR [email protected] Equipment 0 April 30th 05 05:56 PM
Is this voltage doubler different? Mike Silva Homebrew 16 February 2nd 05 06:14 PM
Two Shortwave Listener (SWL) 10:1 Baluns for Random Wire Antennas RHF Swap 0 October 6th 04 09:51 PM


All times are GMT +1. The time now is 08:25 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017