Telamon wrote:

The radio has an external antenna jack that you could use to connect a
small amplified loop antenna. Located a few feet away from the E1 so it
does not pick up the display noise you could point the loop by hand and
I would like that better than having to turn the radio itself in a
certain direction to null out a competing on-channel station or local
noise source. It's more more money and trouble though.




I use a McKay Dymek DA5 shielded loop antenna for MW reception here,
on the external antenna jack of my Fanfare FTA-100. It's a little more
involved than a built-in but the results are worth it. I can null out
competing/interfering stations and noise sources. And peak signals to
maximize noise quieting. Especially on AM stereo sources, this can be a
plus.

The antenna works well with my Grundig's too.

But by having the antenna remotely situated from the tuner, I can
select a lowest noise location for the antenna, which, with the large
number of sources I have in the building, is getting to become more of a
challenge every day.

Lack of an internal ferrite antenna is, at best, a nuisance.

But I've been thinking about something a little more remote.
Something with a pickup outside the building, which is impractical with
the DA-5. Anyone have experience with the CCrane twin coil AM antenna
(formerly Justice antenna?)

Judging by the installation manual, it may be the right solution not
only for me here, but for E1 users who would prefer the noise benefits
of a ferrite antenna.

Any comments from experience would be welcome.


p