Home |
Search |
Today's Posts |
#4
![]() |
|||
|
|||
![]()
On Tue, 31 Jan 2006 15:22:33 -0500, "Robert11"
wrote: Hello: Will be putting up a receive-only antenna (30 MHz) in my backyard. The antenna will terminate in a Balun, and then a lightning arrestor, immediately before the coax (8X probably) run back to the house some 30 feet away. Have read in one or two places a brief comment that it is a good idea to make a few turns of the coax right before the start of the antenna. Termed a "Choke". If so, what is the purpose ? Needed even if there will also be an arrestor ? If a good idea, how many coax turns, of what diameter ? Also a good idea at the other end, by the receiver ? Thanks, Bob A choke passes DC unimpeded and blocks higher frequecy AC. Unless your SWL antenna is mounted on an FM transmitter tower I don't see any advantage. Lightning wouldn't notice it. Most Baluns are actually autotransformers and all parts are at DC ground (provided your coax outer conductor is grounded and the termination is properly affixed). This is the best solution to protecting you from anything other than a direct hit. A lightning arrestor will keep your house from burning down but won't save your radio's front-end. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Grounding | Shortwave | |||
Confused & Annoyed - My new Antenna does not work - What To Do Next ? | Shortwave | |||
No CounterPoise - Portable Antenna System | Shortwave | |||
Dead Serious T2FD: HV Insulation, EMP Arrestors, extra Coax Choke? | Antenna | |||
LongWire Antenna | Shortwave |