Home |
Search |
Today's Posts |
#1
![]() |
|||
|
|||
![]() HFguy wrote: AFAIK, There are no HF transceivers with a sync' detector. I wonder why it is that none of the big three (Kenwood, Icom, Yaesu) have included synchronous detection circuitry on their HF transceivers. A lot of these rigs are loaded with all kinds of goodies, right? And there's the constant competition to put out the ultimate rig... And, I mean, c'mon, it's not as though these units are used exclusively for amateur communications... The rx sections are general coverage, after all... A few extra goodies to make some of these rigs more suited for AM broadcast receiving, and these companies could probably tap in to the SWL market (let's face it, there's not a whole lot of action where new HF tabletop receivers are concerned...it wouldn't take much for Icom/Kenwood/Yaesu to get the attention of SWLers...what with all the IF DSP and spectrum scopes and jazzy multi-colored displays!). And let's face it, having such a rig on the desk can be quite an inducement for an SWLer to subsequently go whole hog for the amateur thing...$$$. Oh, and here's something that the original poster might find interesting (I know I did): John Plimmer's comparison of the Drake R8B receiver and the Icom IC-756ProIII http://www.dxing.info/equipment/icom_ic756_plimmer.dx |
#2
![]() |
|||
|
|||
![]()
On 19 Apr 2006 16:15:17 -0700, "junius" wrote:
HFguy wrote: AFAIK, There are no HF transceivers with a sync' detector. I wonder why it is that none of the big three (Kenwood, Icom, Yaesu) have included synchronous detection circuitry on their HF transceivers. A few extra goodies to make some of these rigs more suited for AM broadcast receiving, and these companies could probably tap in to the SWL market (let's face it, there's not a whole lot of action where new HF tabletop receivers are concerned...it wouldn't take much for Icom/Kenwood/Yaesu to get the attention of SWLers...what with all the IF DSP and spectrum scopes and jazzy multi-colored displays!). And let's face it, having such a rig on the desk can be quite an inducement for an SWLer to subsequently go whole hog for the amateur thing...$$$. Maybe because there's no SWLers left... |
#3
![]() |
|||
|
|||
![]()
In article . com,
"junius" wrote: HFguy wrote: AFAIK, There are no HF transceivers with a sync' detector. I wonder why it is that none of the big three (Kenwood, Icom, Yaesu) have included synchronous detection circuitry on their HF transceivers. A lot of these rigs are loaded with all kinds of goodies, right? And there's the constant competition to put out the ultimate rig... And, I mean, c'mon, it's not as though these units are used exclusively for amateur communications... The rx sections are general coverage, after all... Snip Most ham voice communications are SSB where you would not use sync detection. A few ham operators use AM mode and it would help there I guess but the percentage using AM is small by comparison. -- Telamon Ventura, California |
#4
![]() |
|||
|
|||
![]()
junius wrote:
HFguy wrote: AFAIK, There are no HF transceivers with a sync' detector. I wonder why it is that none of the big three (Kenwood, Icom, Yaesu) have included synchronous detection circuitry on their HF transceivers. Because ham's use mostly SSB on the HF bands. A sync' detector is not useful for that mode. |
#5
![]() |
|||
|
|||
![]() HFguy wrote: Because ham's use mostly SSB on the HF bands. A sync' detector is not useful for that mode. Sure, I realize and appreciate that. But as I said earlier, these transceivers have a general coverage receiver section...it's not as though amateur communications is of any account, for instance, in the MW BCB or the int'l SW BCBs. Through these online fora, it's apparent that a significant number of radio amateurs have an interest in the reception of signals in these bands. Moreover, how much of a further investment would be required to give a transceiver a greater edge in this area? From what I can see, this might be done simply with the addition of AM Sync detector circuitry and the expansion of the DSP variable bandwidth control from the SSB range on up to 6.0 kHz or so. The technology already there, so... |
#6
![]() |
|||
|
|||
![]()
junius wrote:
HFguy wrote: Because ham's use mostly SSB on the HF bands. A sync' detector is not useful for that mode. Sure, I realize and appreciate that. But as I said earlier, these transceivers have a general coverage receiver section...it's not as though amateur communications is of any account, for instance, in the MW BCB or the int'l SW BCBs. Through these online fora, it's apparent that a significant number of radio amateurs have an interest in the reception of signals in these bands. Moreover, how much of a further investment would be required to give a transceiver a greater edge in this area? From what I can see, this might be done simply with the addition of AM Sync detector circuitry and the expansion of the DSP variable bandwidth control from the SSB range on up to 6.0 kHz or so. The technology already there, so... Although it doesn't cost that much these days to extend the range of an HF-transceiver for general coverage, it could be harder to come up with a good sync' detector that doesn't infringe on another manufacturers design. Look what happened to the R-75. I'm sure Icom knows how to design a good sync' detector but there may have been legal limitations to what they could implement. This could be the main reason the manufacturers are not interested in adding a sync' detector to a general coverage HF-transceiver. I also don't think it's really so "apparent that a significant number of radio amateurs have an interest" in listening to international shortwave broadcasts. It's been my experience that few do. |
#7
![]() |
|||
|
|||
![]()
On Fri, 21 Apr 2006 10:14:43 GMT, HFguy wrote:
Although it doesn't cost that much these days to extend the range of an HF-transceiver for general coverage, it could be harder to come up with a good sync' detector that doesn't infringe on another manufacturers design. Look what happened to the R-75. I'm sure Icom knows how to design a good sync' detector but there may have been legal limitations to what they could implement. This could be the main reason the manufacturers are not interested in adding a sync' detector to a general coverage HF-transceiver. I also don't think it's really so "apparent that a significant number of radio amateurs have an interest" in listening to international shortwave broadcasts. It's been my experience that few do. Synchronous detection is old enough to be in the public domain. |
#8
![]() |
|||
|
|||
![]() "HFguy" wrote in message news:ng22g.739$5z3.735@trndny01... junius wrote: Although it doesn't cost that much these days to extend the range of an HF-transceiver for general coverage, it could be harder to come up with a good sync' detector that doesn't infringe on another manufacturers design. Look what happened to the R-75. I'm sure Icom knows how to design a good sync' detector but there may have been legal limitations to what they could implement. This could be the main reason the manufacturers are not interested in adding a sync' detector to a general coverage HF-transceiver. That's an interesting point, but I think Drake is licensing their sync detector and I suppose other manufacturers would also license theirs, if they think it wouldn't take away too many of their own radio sales. That's assuming that's there's still much worth licensing. Most of those patents must have been around a while. Chip fabrication is another issue. ASICs are economical only in large runs. Motorola used sync detection in it's AM stereo chipset, and I'd guess adapting it to a stand alone sync detector would be easy enough. They must have not thought there was enough buyers to bother with. I also don't think it's really so "apparent that a significant number of radio amateurs have an interest" in listening to international shortwave broadcasts. It's been my experience that few do. Speaking only as an occasional hamfest attendee, I've noticed little interst there concerning international broadcasting even though these guys are very much SW radio hobbyists. Frank Dresser |
#9
![]() |
|||
|
|||
![]()
In article ng22g.739$5z3.735@trndny01, HFguy
wrote: junius wrote: HFguy wrote: Because ham's use mostly SSB on the HF bands. A sync' detector is not useful for that mode. Sure, I realize and appreciate that. But as I said earlier, these transceivers have a general coverage receiver section...it's not as though amateur communications is of any account, for instance, in the MW BCB or the int'l SW BCBs. Through these online fora, it's apparent that a significant number of radio amateurs have an interest in the reception of signals in these bands. Moreover, how much of a further investment would be required to give a transceiver a greater edge in this area? From what I can see, this might be done simply with the addition of AM Sync detector circuitry and the expansion of the DSP variable bandwidth control from the SSB range on up to 6.0 kHz or so. The technology already there, so... Although it doesn't cost that much these days to extend the range of an HF-transceiver for general coverage, it could be harder to come up with a good sync' detector that doesn't infringe on another manufacturers design. Look what happened to the R-75. I'm sure Icom knows how to design a good sync' detector but there may have been legal limitations to what they could implement. This could be the main reason the manufacturers are not interested in adding a sync' detector to a general coverage HF-transceiver. I also don't think it's really so "apparent that a significant number of radio amateurs have an interest" in listening to international shortwave broadcasts. It's been my experience that few do. Are you sure about the patent cost? I thought sync detection was mostly implemented through a PLL type circuit. You can buy this circuit on a chip with a handful of support components for it to function. Maybe you have to add a reference oscillator to the circuit with the other support components. Anyone should be able to buy and use these designs. -- Telamon Ventura, California |
#10
![]() |
|||
|
|||
![]()
On Fri, 21 Apr 2006 21:54:39 GMT, Telamon
wrote: In article ng22g.739$5z3.735@trndny01, HFguy wrote: Are you sure about the patent cost? I thought sync detection was mostly implemented through a PLL type circuit. You can buy this circuit on a chip with a handful of support components for it to function. Maybe you have to add a reference oscillator to the circuit with the other support components. Anyone should be able to buy and use these designs. A PLL and a Product Detector |
Reply |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Receiver Upgrade Query | Shortwave | |||
Coax Losses ? | Antenna | |||
Pro-96 CPU upgrade insanity | Scanner | |||
Review: Ramsey HFRC-1 WWV receiver kit | Equipment | |||
Review: Ramsey HFRC-1 WWV receiver kit | Equipment |