hi
my old bsr xl-1200 cartridge is wired onto the pins so it wont pop out
with the 4 prongs as normal one's do. i think i could remove the wires
and put each one onto the prongs of a new cartridge but it seems that
the bsr cartridge is proprietary. there is one screw on top of the
tone arm that holds my cartridge. i'm not sure it will screw into a
new one such as the at3482u. anyone here ahve a solution? i could get
another direct replacement for the bsr cartridge perhaps but i thought
the 3482u (or another) would give me better sound than what i have
now. i could perhaps just snap the new cartridge in without screws.
all the wires in the tonearm are very thin so its hard to solder in
there.
please email me a copy of your response.
thanks
louis

louis wrote:

hi
my old bsr xl-1200 cartridge is wired onto the pins so it wont pop out
with the 4 prongs as normal one's do. i think i could remove the wires
and put each one onto the prongs of a new cartridge but it seems that
the bsr cartridge is proprietary. there is one screw on top of the
tone arm that holds my cartridge. i'm not sure it will screw into a
new one such as the at3482u. anyone here ahve a solution? i could get
another direct replacement for the bsr cartridge perhaps but i thought
the 3482u (or another) would give me better sound than what i have
now. i could perhaps just snap the new cartridge in without screws.
all the wires in the tonearm are very thin so its hard to solder in
there.
please email me a copy of your response.
thanks
louis



Uhhhh - any chance you posted this to the wrong group, mate?

Tony


----== Posted via Newsfeed.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeed.com The #1 Newsgroup Service in the World! 100,000 Newsgroups
---= 19 East/West-Coast Specialized Servers - Total Privacy via Encryption =---

Tony Meloche wrote:

louis wrote:

hi
my old bsr xl-1200 cartridge is wired onto the pins so it wont pop out
with the 4 prongs as normal one's do. i think i could remove the wires
and put each one onto the prongs of a new cartridge but it seems that
the bsr cartridge is proprietary. there is one screw on top of the
tone arm that holds my cartridge. i'm not sure it will screw into a
new one such as the at3482u. anyone here ahve a solution? i could get
another direct replacement for the bsr cartridge perhaps but i thought
the 3482u (or another) would give me better sound than what i have
now. i could perhaps just snap the new cartridge in without screws.
all the wires in the tonearm are very thin so its hard to solder in
there.
please email me a copy of your response.
thanks
louis


Uhhhh - any chance you posted this to the wrong group, mate?

Tony

I think he's trying to 'needle' us.


-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----

"louis" wrote in message
om...

[snip]

You could also ask at rec.antiques.radio+phono

Frank Dresser