Home |
Search |
Today's Posts |
#1
![]() |
|||
|
|||
![]() Group, I just got a Sony ICF-PRO 80 scanner at an estate sale. Unfortunately, it came with no instructions but I've managed to figure out most of the operations. However, even though all the tuning and scanning functions work fine and I can hear stations, the audio output is very low. I thought it might be a dirty lifting connection on the earphone jack, so I plugged in an earphone and "exercised" the jack. It made no difference and the earphone volume was also on the low side. BTW, the low volume condition occurs on the AM and FM band (audio output is so low, i did not try short wave). So, here are my questions... I doubt it, but is this "cockpit error" or a known problem with the PRO 80? If the answer to the above is "no", where can I get a schematic and/or service information for this radio? Sony, Sams Photofact, 3rd party vendor? Thanks in advance for any info! 73/Carter/K8VT |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Question on Sony 2010... | Shortwave | |||
Sony ICF-SW7600GR External Antenna Question | Shortwave | |||
SONY ICF-2001 QUESTION... | Shortwave | |||
Sony SW7600GR Antenna Question | Shortwave |