I need to get ant. mast, but can only find 5 foot sections. I wanted to go
up 20 ft but it looks like I will have to stay with 1 - 10ft section of
conduit. Will 1-3/4" emt be strong enough for an Anton without the G/P kit,
or should I use rigid? I would like to get away from too much weight so I'm
hoping emt is as strong as conventional mast at 1-3/4".

DrDeath wrote:
I need to get ant. mast, but can only find 5 foot sections. I wanted to go
up 20 ft but it looks like I will have to stay with 1 - 10ft section of
conduit. Will 1-3/4" emt be strong enough for an Anton without the G/P kit,
or should I use rigid? I would like to get away from too much weight so I'm
hoping emt is as strong as conventional mast at 1-3/4".
so you stack your fott setions f mask one on the other as they were
desgined to do that is if you are talking antena masts instead trying
to go cheap

"an_old_friend" wrote in message
oups.com...

DrDeath wrote:
I need to get ant. mast, but can only find 5 foot sections. I wanted to
go
up 20 ft but it looks like I will have to stay with 1 - 10ft section of
conduit. Will 1-3/4" emt be strong enough for an Anton without the G/P
kit,
or should I use rigid? I would like to get away from too much weight so
I'm
hoping emt is as strong as conventional mast at 1-3/4".
so you stack your fott setions f mask one on the other as they were
desgined to do that is if you are talking antena masts instead trying
to go cheap

what do you expect from that idiot?



--
Posted via a free Usenet account from http://www.teranews.com

CW wrote:
"an_old_friend" wrote in message
oups.com...

DrDeath wrote:
I need to get ant. mast, but can only find 5 foot sections. I wanted to
go
up 20 ft but it looks like I will have to stay with 1 - 10ft section of
conduit. Will 1-3/4" emt be strong enough for an Anton without the G/P
kit,
or should I use rigid? I would like to get away from too much weight so
I'm
hoping emt is as strong as conventional mast at 1-3/4".
so you stack your fott setions f mask one on the other as they were
desgined to do that is if you are talking antena masts instead trying
to go cheap

what do you expect from that idiot?
never realy sure what to except except for some form of stupidity or
hate spewing

OTOH I did my best to return a kidness for his stupid post I try to
treat my enemeis beter than they treat me. I amy not always mange but I
do try



--
Posted via a free Usenet account from http://www.teranews.com

"an_old_friend" wrote in message
oups.com...

CW wrote:
"an_old_friend" wrote in message
oups.com...

DrDeath wrote:
I need to get ant. mast, but can only find 5 foot sections. I wanted
to
go
up 20 ft but it looks like I will have to stay with 1 - 10ft section
of
conduit. Will 1-3/4" emt be strong enough for an Anton without the G/P
kit,
or should I use rigid? I would like to get away from too much weight
so
I'm
hoping emt is as strong as conventional mast at 1-3/4".
so you stack your fott setions f mask one on the other as they were
desgined to do that is if you are talking antena masts instead trying
to go cheap

what do you expect from that idiot?
never realy sure what to except except for some form of stupidity or
hate spewing

OTOH I did my best to return a kidness for his stupid post I try to
treat my enemeis beter than they treat me. I amy not always mange but I
do try



--
Posted via a free Usenet account from http://www.teranews.com

well he certainly has given you a ration of ****, to be sure.
remember these 2?
http://www.435online.com/n6idf-k6sne.htm
thats what can happen when idiots like him try to play radio. i mean he's an
asshat but i don't wish anything bad on him.



--
Posted via a free Usenet account from http://www.teranews.com

CW wrote:
"an_old_friend" wrote in message
oups.com...

CW wrote:

what do you expect from that idiot?
never realy sure what to except except for some form of stupidity or
hate spewing

OTOH I did my best to return a kidness for his stupid post I try to
treat my enemeis beter than they treat me. I amy not always mange but I
do try

well he certainly has given you a ration of ****, to be sure.
remember these 2?
yep
http://www.435online.com/n6idf-k6sne.htm
thats what can happen when idiots like him try to play radio. i mean he's an
asshat but i don't wish anything bad on him.
I wish nothing bad on him or Fred or even Wisemen or Robeson. sadly
esp the later 2 are stuck so far out there that death tiself likely
become a mercy for them

can you imaginine how bad Wismen would feel if one day he woke up clear
headed and realized what an ass he had been, might just drive out of
his mind

who knows prehaps this has happened many times by now

but radio stuff having a decent time now on 6m psk31 a bit frustring
since the porg is not holding steady for me but here I am typing on ngs
and listening and qsoing all at the same time



--
Posted via a free Usenet account from http://www.teranews.com

"CW" wrote in message
.. .

"an_old_friend" wrote in message
oups.com...

DrDeath wrote:
I need to get ant. mast, but can only find 5 foot sections. I wanted to
go
up 20 ft but it looks like I will have to stay with 1 - 10ft section of
conduit. Will 1-3/4" emt be strong enough for an Anton without the G/P
kit,
or should I use rigid? I would like to get away from too much weight so
I'm
hoping emt is as strong as conventional mast at 1-3/4".
so you stack your fott setions f mask one on the other as they were
desgined to do that is if you are talking antena masts instead trying
to go cheap

what do you expect from that idiot?


--
Posted via a free Usenet account from http://www.teranews.com


Ah, flaming me for being on topic. I love it when trolls like you and
Markie-tard resort to name calling when a technical question is to
complicated for you to answer. plonk

i have always used 1¼ thin wall steel pipe for the past 40 yrs on
different locations while installing all kinds of antennas and never had
a problem with any of them. Dan KBO 1257

"Dan Sr." wrote in message
...
i have always used 1¼ thin wall steel pipe for the past 40 yrs on
different locations while installing all kinds of antennas and never had
a problem with any of them. Dan KBO 1257


Great! Thanx.