| Home |
| Search |
| Today's Posts |
|
#1
March 13th 07, 11:31 PM
posted to rec.radio.swap
|
|||
|
|||
Help w/Maxtrac programming?
Does anyone remember how to get the Maxtrac (UHF) to go into the ham band? The legal software says it's good from 449.000 to 470.000. I had previously programmed freqs as low as 442 in it, but I can't remember how I did it. Using the "shift" key doesn't work. Brain fades are terrible. Please respond to sx43ster at gmail dot com Thank you. |
|
#2
March 14th 07, 12:43 AM
posted to rec.radio.swap
|
|||
|
|||
|
Help w/Maxtrac programming?
Your on the right track
Shift using all the numbers No shift on the desimal and add all the spaces including the zeros Go to batlabs.com "Hunchy" wrote in message news:IvGJh.3167$I56.1082@trnddc06... Does anyone remember how to get the Maxtrac (UHF) to go into the ham band? The legal software says it's good from 449.000 to 470.000. I had previously programmed freqs as low as 442 in it, but I can't remember how I did it. Using the "shift" key doesn't work. Brain fades are terrible. Please respond to sx43ster at gmail dot com Thank you. |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| FS: Maxtrac VHF | Swap | |||
| F/S UHF Maxtrac | Swap | |||
| maxtrac programming needed | General | |||
| programming software wanted for MAXTRAC | Equipment | |||
| programming software wanted for MAXTRAC | Equipment | |||
Linear Mode
