[QRZ.com via rec.radio.info Admin]

Ham Radio Gear For Sale

///////////////////////////////////////////
Icom IC-7410 with 3khz & 6khz roofing filters

Posted: 01 Sep 2016 02:07 PM PDT
http://forums.qrz.com/index.php?thre...ilters.536209/

1000$ shipped to the lower 48, if you can meet within 100 miles of DFW we
can do 950 cash... If you decide to get the radio we can chew the fat and
get all the payment issues taken care of on the phone.. All payments must
clear before I ship.. I purchased this radio from HRO in Dallas in
January 2016 (I have the receipt) so its still under warranty.. In April
I purchased the IC-7300 and this radio has been in the box since. I had
this radio on this forum for sale but apparently it...



Icom IC-7410 with 3khz & 6khz roofing filters

///////////////////////////////////////////
Icom IC-706MK2G Late Model

Posted: 01 Sep 2016 01:33 PM PDT
http://forums.qrz.com/index.php?thre...-model.536205/

I have a spare IC-706MK2G available. It only comes with the original HM-103
microphone. The power cord I was using is only about a foot long so its not
included. Note: This is a later version radio with RD70HHF FETs in the
finals. This radio is 100% operational including everything on the ACCY
connector and the CI-V port. I have connected to it with my computer and
controlled it using the command program.



It is above average in appearance but its not mint or NIB. There are some
scuffs...



Icom IC-706MK2G Late Model

///////////////////////////////////////////
Antenna Bracket

Posted: 01 Sep 2016 01:27 PM PDT
http://forums.qrz.com/index.php?thre...racket.536204/

looking for $70 shipped OBO usps ground . The bird poop is free .Email good
on QRZ.



View attachment 317302

///////////////////////////////////////////
FS=ICOM IC 756PRO2

Posted: 01 Sep 2016 01:19 PM PDT
http://forums.qrz.com/index.php?thre...56pro2.536202/

icom 756pro2...$900 plus shipping



///////////////////////////////////////////
RC-740x Kenwood Expander TM-742/741 or TM-641/642

Posted: 01 Sep 2016 12:49 PM PDT
http://forums.qrz.com/index.php?thre...41-642.536201/

RC-740x Kenwood Expander TM-742/741 or TM-641/642



THIS VERY RARE ITEM GIVES THE KENWOOD TRIBANDERS THE ABILITY TO ADD MORE
THAN ONE MODULE TO THE RADIO. 2 IN THE RADIO AND 4 IN THE EXPANDER, COMES
COMPLETE AND IS TESTED AND WORKING. $300 PLUS SHIPPING call or email 708
357 3315

///////////////////////////////////////////
Icom 706MK2 HF/6m/2m all mode

Posted: 01 Sep 2016 01:10 PM PDT
http://forums.qrz.com/index.php?thre...l-mode.536200/

I have for sale an Icom 706MKII HF/6m/2m radio for sale in decent
condition. This model does 100 watts on HF and 6m and 20 watts on 2m and
also has a built in keyer, built in tone encoder, CW/SSB/AM/FM, built in
power/SWR meter, and built in speech processor.



It works fine but has some scratches on the top and bottom covers. The
faceplate latch is broken so the head has been taped to the body (easy to
remove), and it is missing the RIT know so a different type of knob was
fitted by the...



Icom 706MK2 HF/6m/2m all mode

///////////////////////////////////////////
Icom 756 HF/6m radio for sale

Posted: 01 Sep 2016 12:43 PM PDT
http://forums.qrz.com/index.php?thre...r-sale.536199/

I have for sale an Icom 756 HF and 6 meter 100 watt radio. This is the
model that has the real time band scope, DSP for noise reduction and auto
notch, an audio peak filter for CW (very effective), CW memory keyer, and
dual receive-both receivers have to be on the band and mode.



You can read all about the 756 at:



http://www.universal-radio.com/catalog/hamhf/756.html



The case shows a lot of wear on it with numerous scratches on the top
cover, the sides look pretty good, and...



Icom 756 HF/6m radio for sale

///////////////////////////////////////////
Elecraft K3

Posted: 01 Sep 2016 12:39 PM PDT
http://forums.qrz.com/index.php?thre...aft-k3.536198/

Here is your opportunity to purchase one of the most highly sought after
amateur radio transceivers particularly by Ham radio contesters. This
Elecraft K3 was factory built - Serial Number 01283. The condition of this
one owner radio would be considered excellent and used in a non-smoking
environment.



The Elecraft K3/100 (100 Watt Transceiver) purchased in 2008 for $2,600
comes with the following options installed:



KAT3 Antenna Tuner

KBPF3 general coverage module

KFL3A-500 500 Hz...



Elecraft K3

///////////////////////////////////////////
Kenwood TM-842 - Same as TM-742 but with 1200mhz/430mhz

Posted: 01 Sep 2016 12:29 PM PDT
http://forums.qrz.com/index.php?thre...430mhz.536195/

This is a Kenwood TM-842E I bought new a few years ago in Japan. The TM-842
is a TM-742 with 1200mhz/430mhz stock from the factory (rather than
2m/440mhz) and only sold in Japan and Europe. I used it in my lab for some
repeater experiments a few years ago and then its sat on the shelf. Its in
excellent condition and has never been out of my shack but has some minor
scratches due to handling. Comes with a 1200mhz module and a 430mhz module.



This is a great 1200mhz mobile/base with no mods...



Kenwood TM-842 - Same as TM-742 but with 1200mhz/430mhz

///////////////////////////////////////////
KENWOOD TM-742A TRIBAND VHF /220/440

Posted: 01 Sep 2016 12:10 PM PDT
http://forums.qrz.com/index.php?thre...20-440.536193/

KENWOOD TM-742A TRIBAND VHF /220/440





KENWOOD TM-742A TRIBAND WITH THE 220 OPTION. COMES WITH MIC AND POWER CORD.
$450 PLUS SHIPPING CALL OR EMAIL 708 357 3315

///////////////////////////////////////////
Hf vhf/uhf radio power cords

Posted: 01 Sep 2016 12:09 PM PDT
http://forums.qrz.com/index.php?thre...-cords.536192/

email me with your power cord needs I might be able to build you a power
cord.

also have 4 15.00 shipped

Power cords left to right, all power cords are made 6 foot long from #12
red/black zip wire with 25 amp crimped fuse holder with a fuse in red wire
only,1/4 eye soldered on ends all connections on power cord are crimped and
soldered.

Power cord #1 6 ft.long 30 amp anderson power pole power cord.

Power cord #2 4 pin cinch jones power cord used on some of the older radios.

Power cord #3 t...



Hf vhf/uhf radio power cords

///////////////////////////////////////////
Shack cleaning, tube testers, 1000's of vaccum tubes

Posted: 01 Sep 2016 01:17 PM PDT
http://forums.qrz.com/index.php?thre...-tubes.536190/

Precision tube tester, good condition for its age, not tested. $100

EMC model 209 Small tube tester, $25

Four totes of vacuum tubes, industrial, consumer, sweep, 4 through 11 pins,
all untested. $100 and you can keep the totes. I wont look for any
individual tubes.

Knight table top wooden radio, 1940?, appears complete but cabinet is a
wreck, untested, $5

Philco 1942 console radio, complete except for knobs, untested, with
schematic, $50

Zero aluminum case with latches and combo lock....



Shack cleaning, tube testers, 1000s of vaccum tubes

///////////////////////////////////////////
ICOM 144mhz IC-T22A 2M HT Complete near Chicago

Posted: 01 Sep 2016 11:48 AM PDT
http://forums.qrz.com/index.php?thre...hicago.536188/

Here is an Icom IC-T22A 144mhz HT Complete in box with Instructions. Box
has seen better days. HT works fine. I just replaced the speaker in the HT
and at FULL volume it sounds distorted but 2 notches down from MAX volume
or less sounds fine. Im sure its just cause too much audio on that tiny
speaker. Other than that works great. Received great audio reports from
other stations on this HT vs other radios Ive used. Apologize for HT
looking little dirty near speaker holes, man does...



ICOM 144mhz IC-T22A 2M HT Complete near Chicago

///////////////////////////////////////////
Cushcraft A3 Triband 10/15/20 Local P/U Near Chicago

Posted: 01 Sep 2016 11:40 AM PDT
http://forums.qrz.com/index.php?thre...hicago.536187/

Here is a Cushcraft A3 Triband Antenna. Antenna is supposed to do 10/15/20
but has a bad Trap(s). I took it apart to blow out the traps and clean them
but have not taken them apart to do a full inspection. For all I know I
assembled the traps in the wrong spot. So worse case scenario bad traps.
But I have it resonate on 10M its just 15M and 20M were high SWR. Was taken
down from a friends QTH and said to work but could only get 10M resonate
when up at my QTH. Everything labeled where...



Cushcraft A3 Triband 10/15/20 Local P/U Near Chicago

///////////////////////////////////////////
Gin Pole

Posted: 01 Sep 2016 11:35 AM PDT
http://forums.qrz.com/index.php?thre...n-pole.536186/

I have my own 2 inch pipe just need the hardware . Email good on qrz