Home |
Search |
Today's Posts |
#1
![]() |
|||
|
|||
![]()
I just recently purchased a Heathkit SB-200 amplifier which seems to
have a self oscillation problem. When the amplifier is keyed through it's relay input I get RF output with zero input ! In fact there isn't even anything hooked to the input jack. This problem occurs mostly on 10 and 15 meters. The SWR and wattmeters on my tuner pin as soon as the amp replay is keyed. By turning the loading down to zero it will usually (but not always) stop. At one point I while testing the amp (when it was working right) I was able to load almost to 800 watts out on 20 meters but when I went to 15 and 10 meters it started this problem and cant seem to get much over 300 or 400 out now. Could this be indicative of a bad 572B tube ? Perhaps a shorted one ? Any hyelp would be greatly be appreciated. I am a new amp owner have just been running 100 watts for the last 30 years ! -- Tim, K8TJ (ex-WB8OGM) 4/7/2003 @ 6:39:04 AM |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
HELP: 2 meter repeater intermod problem from pager transmitters | General | |||
OT EMI problem with stove and internet connection | Homebrew | |||
Heathkit SB-200 Amplifier Problem Help? | Boatanchors | |||
National NCX-5 transmit/receive offset problem | Equipment | |||
National NCX-5 transmit/receive offset problem | Equipment |