| Home |
| Search |
| Today's Posts |
|
|
|
#1
|
|||
|
|||
|
My limited experience with a group of exit lights is that they used
special expensive bulbs, but the electric supply place I went to find replacements suggested some relatively new (at the time) replacements which had a significantly long life spec. They were (are) neon bulbs as I remember, and they have lasted many years. Well worth the money. Exit fixtures have specs on what bulbs are to be used, I think. Also, as someone stated wrongly about neon bulbs requiring high voltage, they instead need series R to limit the current. --Phil nobody wrote: In wrote: But in 1978 I wired the 2 bulbs in the each of the EXIT lights in the church in series. Congratulations, you probably bypassed a safety feature. If they're in parallel, if one burns out the other keeps going. In series, if one goes they're both out, and the exit sign is no longer visible. -- Phil Munro Dept of Electrical & Computer Engin Youngstown State University Youngstown, Ohio 44555 |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Hint on replacement for Yaesu panel lamps | Equipment | |||
| Hint on replacement for Yaesu panel lamps | Equipment | |||
| Nordmende Globetraveler Super dial lamps | Shortwave | |||
| Lamps? | Homebrew | |||
| Lamps? | Homebrew | |||