Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]()
20 bux hu?
You can built one out of a SO-239 coax connector, a aluminum L bracket. A U-bolt, and some welding wire/and or solid copper and some solder....maybe 5 bux at most. Dan/W4NTI "CommCtr1" wrote in message ... Well you see gentlemen, after spending a day up on the roof, it appears I typed without proof reading. You would all be correct, how would you cut a 220mhz antenna to work on 144mhz????? Good question! So let me stand corrected and say, it can be cut for 440mhz.......................... NOT 144mhz. Thanks for noticing my mistake............ 73 Lou |
#2
![]() |
|||
|
|||
![]() "Dan/W4NTI" w4nti@get rid of this mindspring.com wrote in message ink.net... 20 bux hu? You can built one out of a SO-239 coax connector, a aluminum L bracket. A U-bolt, and some welding wire/and or solid copper and some solder....maybe 5 bux at most. Too expensive....all you need is an SO-239 and a coffee can with a piece of copper wire and some solder Dan/W4NTI "CommCtr1" wrote in message ... Well you see gentlemen, after spending a day up on the roof, it appears I typed without proof reading. You would all be correct, how would you cut a 220mhz antenna to work on 144mhz????? Good question! So let me stand corrected and say, it can be cut for 440mhz.......................... NOT 144mhz. Thanks for noticing my mistake............ 73 Lou |
#3
![]() |
|||
|
|||
![]()
Dan/W4NTI wrote:
20 bux hu? You can built one out of a SO-239 coax connector, a aluminum L bracket. A U-bolt, and some welding wire/and or solid copper and some solder....maybe 5 bux at most. Dan/W4NTI Remember, most of these were bottle fed and have no concept of self-help. You're a good samaritan. Now you'll be bombarded with requests to build same for them for 5 bux shipping included! |
#4
![]() |
|||
|
|||
![]() "Dean Arthur" wrote in message ... Dan/W4NTI wrote: 20 bux hu? You can built one out of a SO-239 coax connector, a aluminum L bracket. A U-bolt, and some welding wire/and or solid copper and some solder....maybe 5 bux at most. Dan/W4NTI Remember, most of these were bottle fed and have no concept of self-help. You're a good samaritan. Now you'll be bombarded with requests to build same for them for 5 bux shipping included! Sorry, I'm not in the antenna suppy business. Its up the the vast unwashed to figure out how. Dan/W4NTI |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Inverted ground plane antenna: compared with normal GP and low dipole. | Antenna | |||
ground plane for a magnetic mount cellular antenna | Antenna | |||
Grounding Rod | Shortwave | |||
FS: MFJ 220mhz ground plane $20.00 | Antenna | |||
QST Article: An Easy to Build, Dual-Band Collinear Antenna | Antenna |