LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #14   Report Post  
Old January 20th 06, 11:40 PM posted to rec.radio.swap
SHb
 
Posts: n/a
Default Radio Shack's diminishing parts offerings....was: Why don't I learn


Try sattvrepair.com
click on electronic parts and used equip lings for:
Electrolytic Caps, radial and axial, 85 deg and 105 deg
ICs
new and used stuff

and more
even a Collins S Line.....


"Straydog" wrote in message
x.com...

(see quoted posts at end)

In the last year I've paid a lot more attention to what RS (RC!) has or
does not have in the line of parts. Around me are a little more than 1/2
dozen, and I've scanned through those 2-4 cubic yard drawers and more or
less memorized what they have, and where. Some places have zip, others are
not too bad.

You can get some catalogs by mailing to some of those addresses in the
back of QST that advertise parts/antique radio, etc.

Also, Newark is still in business (www.newark.com, I think, and you can
fill out an on-line form and get a very thick catalog in 1-2 months [you
can still get some tube-relevant parts, but its mostly solid-state only
these days]).

Also, maybe try your search engine. There is a rec.radio.amateur FAQ...I
don't recall if it had a source list, but that would be useful. Some
places are starting to charge outrageous prices for stuff (transformers
that used to be $10-15 a few years ago are now $40-60 and they are still
surplus!!). Me, I'm kludging together what I need by connecting,
back-to-back, things like filament transformers to get B+, etc.

I grew up on kits, soldering irons, and making your own stuff. Now, I
wonder...do you have to go to a 3rd world country to get parts? (India,
China, Russia? [I even wonder if the kids over there make things? Or, did
they just leap into solid state, and throw-away-society mindsets like we
have here in the US?]).

W4PON

===== no change to below, included for reference and context =====

On Sun, 15 Jan 2006, Jack O'Neill wrote:

Rich wrote:

This is the second time in three weeks I went to Radio Shack for
something
and they didn't have it.

1. was a speaker L pad
2. was a 300K PC pot and a 200K resisters.




Radio Shack, you got questions (or parts) we got.............. DUH,
what that??
With sub-standred parts (experimental quality) and junk
98% of Radio Craps should go out of business.






 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Stevei needs to learn an old friend Policy 0 December 8th 05 08:51 AM
FA: Your introduction to Morse Code CDs ARRL Learn CW (NR ) [email protected] Equipment 1 November 29th 05 11:37 PM
Just Learn Morse Code - NEW version (1.1) Sigurd Stenersen Dx 4 November 3rd 05 08:01 PM
Just Learn Morse Code - NEW version (1.1) Sigurd Stenersen General 4 November 3rd 05 08:01 PM
Why can't I even pass the test or learn 5 wpm morse code?????????? AB8MQ Policy 1 October 10th 05 09:50 PM


All times are GMT +1. The time now is 11:00 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017