On Thu, 05 Feb 2004 14:08:30 -0600, Cecil Moore
wrote:
forward current is always greater than reflected current,
EZNEC displays net current.
On Thu, 05 Feb 2004 14:22:29 -0600, Cecil Moore
wrote:

the current flowing into the bottom of the coil, according to EZNEC,
is 0.18 amp at -54 degrees.
The current flowing out the top of the coil is 0.2
amp at 126 degrees. Those two currents are flowing in exactly
opposite directions. How do you explain that?

Well with the wisdom accumulated thus far you don't know how to use
and or interpret EZNEC (fairly obvious). Let's look at the howlers:
forward current is always greater than reflected current,
compared to:
the current flowing into... 0.18 amp
The current flowing out ... is 0.2 amp

OR
the current flowing into... bottom of the coil
Forward compared to Reverse
The current flowing out ... top of the coil
which describes the same direction: into bottom - out of top.

Such logical knots (nuts) are derived from the faulty application of
EZNEC displays net current.

73's
Richard Clark, KB7QHC