In article .net,
says...
I want to run an antenna in my attic to pick up SW signals. I plan on
running speaker wire, possibly in an up down zig zag pattern on the rafters.
I checked out the web pages regarding antennas but being technically
illiterate, gleaned little from them.

Here are the questions that I have:

1. Is speaker wire okay? Should I use a different type?

2. What's the minimum distance the antenna should be away from far away from
electrical wiring?

3. If I don't have one strand which will reach, is it okay to splice the
wire on another strand? What would be the best way to do this?

4. Is a zig zag pattern a good way to lay out the antenna or should I make a
big straight loop with it? A bunch of loops? Would a horizontal zig zag be
better? Would it matter?

5. Should I have anything on the ends of the wire or leave them bare?

Any help you can give me will be greatly apprechiated.



1. Yes speaker wire will work.
2. I would recommend 12"
3. Yes, and you may want to solder.
4. Zig zag will work fine.
5. Bare is fine

Hope this helps
--
**********************************************
* Check out www.activesignals.com *
* It has LIVE CHAT and a forum board for *
* shortwave, amateur, and scanner radios *
**********************************************