S R wrote:

I want to build an antenna for my shortwave radio. I live in an apartment.
So it would have to be something I could put near the window. No longer
then 3 feet.

My idea is having 2 wires in a coil. Wrapped around PVC tubing on each end.
It would look like the letter T. ( I am not sure which size of tubing to
use).

I am not sure how many feet of wire.

Which type of wire.

Should the wire be shield or not shield.

If not shield, then when I wrap the wire, can it touch itself in the turn or
must it be spaced apart?

Then comes the end of the two wires. What do I use to solder to then plug
into my portable radio?

And is their a way I could make a tuner and have the wires connected to that
first then to the radio?

Thanks.

73

Before you start building indoor antennas, try putting at least 10-ft of
fine wire (#30 enameled magnet wire) out through a second story window
or higher. You can put a small weight like a washer on the end to make
the wire hang down the side of the building (not really necessary) but
make sure the weight doesn't hit any window below. No one is likely to
see this 'invisible' antenna wire unless they're looking for it. Connect
the other end of the wire to the whip antenna on your portable. Be sure
to remove some of the enameled insulation (using sand paper) to expose
the bare copper wire where it connects to the whip.


-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----