When you dis-assemble the radio make sure you get the connectors back in the proper spots, and be very careful with the display.

There is very little disassembling to do. The only connector that has to
be removed from the PC board is the encoder wiring harness plug. It
doesn't involve anything with the display other than removing the clear
plastic window in front of the display, which comes off with the front
black panel. It might help to remove the screws which hold the front
chassis panel (under the front black panel) to the main chassis, so you
can pull the front chassis panel forward a little to gain better access
to the encoder from the bottom. There is enough slack in the other
wiring harnesses to do this without removing more wiring connectors.


-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----