Lucky wrote:

Hi

Ok right now I'm using my JRC NRD-525 with a 35 Ft dipole and a 4:1 Current
balun coupled with a MFJ-959 pre-amp/tuner. I don't use the tuner that
often. As you know it amps the noise too along with the signal so I use only
it when absolutely neccessary. I'm on the 23rd floor of a building so I get
good signals.

That's your problem... you're using a dipole. A dipole is for use on a very
narrow range of frequencies. Now, using the tuner, you might get a better match
to the receiver.

My suggestion would be to use a single wire, and match it with a transformer. I
think you might get better broadband performance from that.

However, you may be somewhat limited being on a 23rd floor.

That's not so lucky, no pun intended.

dxAce
Michigan
USA