"starman" wrote in message
...
Lucky wrote:

I just wanted to add I bought the remote control option for the R-75 and
it's fantastic.
It has features you don't have from the radio control panel itself!

I want to buy the UT-102 voice synthesizer so I can announce the
frequency,
S-Meter strength, mode etc from the remote controller in the dark like a
kid


Lucky

Can you control the volume with the remote?

----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet
News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+
Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption
=----

Can you control the volume? Hell yeah! Mute also.You can also adjust the
PBT. It has features the radio doesn't have like PBT IF shift, both PBT in
the same direction with the press of one button.

PBT in opposite directions with one button.
NR, ANF, etc..everything.

Read:
Features
a.. Turn receiver on and off.
b.. Set a sleep time.
c.. Control receiver volume with VOL+/-.
d.. Mute receiver/return to previous volume.
e.. Enter frequency directly to 1Hz in the range of 30kHz to 60MHz.
f.. Increase or decrease frequency using CH +/- in steps of 1Hz, 10Hz,
100Hz, 1kHz, 5kHz, 9kHz, 10kHz, 100kHz, and 1MHz in the range of 30kHz to
60MHz.
g.. Set up to five (5) User Tuning Steps. Useful for detuning frequencies
by one half of filter bandwidth or use a very small frequency step to
quickly zero-beat in SSB mode.
h.. Recall last directly entered frequency.
i.. Directly select memory channels.
j.. Move up and down through memory channels using CH +/-.
k.. Start and Stop programmed and memory scans.
l.. Move memory frequency and mode to VFO.
m.. Write VFO frequency and mode to currently selected memory.
n.. Toggle between AM, S-AM, LSB, USB, FM (configurable), or CW
(configurable).
o.. Select VFO or Memory mode.
p.. Control of RF gain and SQL.
q.. Control of Inner and Outer PBT independently and together. Both PBT
controls can be moved together in the same direction as an IF bandpass
shift, or in opposite directions to adjust IF bandwidth. This only works
with certain IF filter combinations.
r.. Enable NR and directly set the level. Only works with DSP (UT-106)
option installed.
s.. Enable NR and move up and down through the levels. Only works with
DSP (UT-106) option installed.
t.. Move RF Gain, SQL, and PBT to full CW, CCW, and default settings
independently.
u.. Set up to six (6) User Definable settings each for RF Gain, Squelch,
Inner PBT, Outer PBT, and Both PBTs.
v.. Select Fast AGC, Slow AGC, or AGC off (configurable).
w.. Select Normal, Wide, or Narrow filter.
x.. Select Preamp 1, 2, or none.
y.. Select ANT 1 or 2.
z.. Toggle RF Attenuation on or off.
aa.. Toggle ANF on or off. Only works with DSP (UT-106) option installed.
ab.. Toggle NB on or off.
ac.. Toggle Memory Label display on and off in memory mode.
ad.. Announce with speech synthesis. Only works with Speech Synthesis
(UT-102) option installed.
ae.. Adjust LCD Backlight brightness.
af.. Settable parameters:
a.. CI-V address.
b.. Radio baud rate (1200, 4800, 9600, or 19200).
c.. Enable/Disable FM and CW modes in mode selections.
d.. Enable/Disable AGC off in mode selections.
e.. Frequency pacing. You can control the pacing of frequency up and
down. This is how fast the frequency changes when you hold the CH+/- keys.
f.. Define up to five User Tuning Steps.
ag.. Status LED that shows communications status, center position of
RF/SQL and PBT controls, settable parameter entry, and clear key operation.