Wayne wrote:


There is a complete service manual, including alignment procedure, for
the DX-150B available for download at the following web site:
http://www.decodesystems.com/found.html
You should be able to adapt it to work on the DX-160 - I'd assume that
the overall process would be the same.
Also, if you don't already have one, a copy of the DX-160 Owners
Manual can be downloaded from this page:
http://209.145.176.7/~090/awh/bearcatting.html
Hope that helps!
Regards,
Wayne

Thanks Loads Wayne -- I've downloaded both and will have to check
later as I've a lot of things to do today, but I'm sure it's going
to help one way or another.

Irv VE6BP
--
--------------------------------------
Diagnosed Type II Diabetes March 5 2001
Beating it with diet and exercise!
297/215/210 (to be revised lower)
58"/43"(!)/44" (already lower too!)
--------------------------------------
Visit my HomePage at http://members.shaw.ca/finkirv/
Visit my very special website at http://members.shaw.ca/finkirv4/
Visit my CFSRS/CFIOG ONLINE OLDTIMERS website at http://members.shaw.ca/finkirv5/
--------------------
Irv Finkleman,
Grampa/Ex-Navy/Old Fart/Ham Radio VE6BP
Calgary, Alberta, Canada