"Joshua G Senecal" wrote in message
avis.edu...
Hi All,

We have a Ten Tec 238 Tuner, and we're having some problems with the
display/indicator for the roller inductor. To be specific, the indicator
is out of adjustment. When I crank the inductor CW the indicator moves to
the right, but after going about 1/3 of the way it reverses direction and
moves back to the left! When I crank the inductor CCW the indicator moves
to the left and stops when it reaches the edge, but there's still more
turns left on the inductor.

I'm guessing that we're going to have to open it up and either
replace/readjust something. I know nothing about this tuner, and have no
idea as to what I'm going to require, nor how to go about it.

I did some searching (Google etc.) but was unable to find anything
helpful.

Any hints/advice?

Thanks!

-Josh Senecal, AE6IQ
John,
This has been covered on the TenTec mail list. at contesting.com. I am not
certain whether they maintain an acrchive or not. This is one of the reasons
that Ten Tec has changed their design to
do away with the string dial in the B model.

You might also write to Service at tentec.com and I'll bet they would send
you instructions on what to do.
Ed, N5EI





----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 100,000 Newsgroups
---= East/West-Coast Server Farms - Total Privacy via Encryption =---