View Single Post
  #2   Report Post  
Old September 13th 03, 08:47 AM
Ed Cregger
 
Posts: n/a
Default

It is possible that the drain holes are plugged. Running a small piece of
wire into the drain holes to ensure that they are unblocked might be a good
idea. Good luck.

Ed Cregger, NM2K


"Fam. Mugge" wrote in message
...
Hi All,

Recently I bought a CP-6 groundplane by Diamond. It worked really well

till
we had one day with rain. That evening I couldn't use the antenna due to
very high SWR readings. The day after it was a clear day without any rain
and that evening SWR was back to normal. Water in a coax won't go away

that
quickly and the antennasocket was made waterproof with special tape.
Would it be possible that that dainholes in the coilcompartments are

causing
trouble?
If so, is there something I can do about it, like clueing small tubes on

the
coilcompartment, so that condenswater can get out, but rainwater can't

come
in?
Or is the problem caused by something else?

Best regards,

Willem

PH0WAW