Steve,

Setting-Up the Sony ICF-SW7600GR with the Select-A-Tenna
on a Lazy Susan for AM/MW DXing.
http://groups.yahoo.com/group/Shortw...a/message/5886

Are you using the Select-A-Tenna and the Sony ICFSW7600GR
Positioned correctly on a Lazy Susan with the middle of the
backside of the Select-A-Tenna placed against the Left-End-Side
of the Sony ICF-SW7600GR ?

Visualize - That 'together' they sort of form a "T"
laying flat when seen from the Top.

Note - The Sony ICFSW7600GR should be Standing-Up
(Vertically) on it's Bottom.

The Sweet Spot - Then if needed you can adjust the "Coupling"
between the Select-A-Tenna and the Sony ICFSW7600GR by
creating a "GAP" (Space) between the two. Move it about a
Half Inch at a Time and try several "Distant" AM/MW Radio
Stations that are all across the AM/MW Band.

hope this helps - iane ~ RHF