Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]()
Steve,
Setting-Up the Sony ICF-SW7600GR with the Select-A-Tenna on a Lazy Susan for AM/MW DXing. http://groups.yahoo.com/group/Shortw...a/message/5886 Are you using the Select-A-Tenna and the Sony ICFSW7600GR Positioned correctly on a Lazy Susan with the middle of the backside of the Select-A-Tenna placed against the Left-End-Side of the Sony ICF-SW7600GR ? Visualize - That 'together' they sort of form a "T" laying flat when seen from the Top. Note - The Sony ICFSW7600GR should be Standing-Up (Vertically) on it's Bottom. The Sweet Spot - Then if needed you can adjust the "Coupling" between the Select-A-Tenna and the Sony ICFSW7600GR by creating a "GAP" (Space) between the two. Move it about a Half Inch at a Time and try several "Distant" AM/MW Radio Stations that are all across the AM/MW Band. hope this helps - iane ~ RHF |
#2
![]() |
|||
|
|||
![]()
For One and All,
There is a Sony ICF-SW7600GR 'portable' AM/FM Shortwave Radio with the Sony AN-LP1 Active Loop Antenna currently on eBay. eBay Auction Item Number : 5823221447 http://cgi.ebay.com/ws/eBayISAPI.dll...tem=5823221447 Looks like a complete ready-to-go 'portable' Shortwave Radio with Active Shortwave Loop Antenna for the SWL Traveller on-the-go. fyi ~ RHF |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Imax ground plane question | CB | |||
Sony 7600GR antenna, does not turn smoothly | Shortwave | |||
EH Antenna Revisited | Antenna | |||
FS: Connectors/Adapters/Meters/Etc. | Equipment |