2.4 GHz is the problem.
That frequency is too congested at this location.
I need to move the signal OUT of the 2.4 GHz band.
"Scott" wrote in message
...
http://www.jameco.com/ sells video transmitters for 2.4 GHz. If you
have composite video available, it would be easier and legal to go this
route.
Scott
Neil Preston wrote:
I want to be able to send a UHF TV signal (400-800 MHz) from one end of
the
house to the other. I have a UHF digital PLL modulator with an output
level
of 7dBmV minimum, and would like to use it to feed a small linear 100 mW
"power" amp to a 1/4 wave whip.
I don't think I'll find such a critter very easily, (if at all) so I
would
like some suggestions as to how I might find resources to build one. (Of
course, a pre-designed schematic and PCB layout would be ideal!)
Anyone have any suggestions as to where to start? (Besides Google...
BTDT.)
Neil Preston, CET