For One and All,

AM/MW/BCB Loop Antenna
for DX MW LF VLF *No Tuning* - by W1VLF
http://cgi.ebay.com/_W0QQitemZ5835229011
Highlights - Here is an very low impedance Loop Antenna,
constructed of 1/2" copper piping, 24" on a side, with a
Broadband Impedance Transformer, and a 20 db Gain
Low Noise, High Dynamic Range Pre-Amplifier. The
output is a common UHF type SO 239 female connector.

WWVB 60 kHZ Ferrite Loop Active Antenna - by W1VLF
http://cgi.ebay.com/_W0QQitemZ5837399066
Highlights - The Antenna is 3 Ferrite Rods formed together
and wound with number 21 AWG Wire. There is a
Pre-Amplifier inside the base of the Antenna, and it is
powered up the Coax.

W1VLF = Paul Cianciolo
[ Vanagon = Rescue Electronics Surplus ]
http://stores.ebay.com/RESCUE-ELECTRONIC-SURPLUS

Hope the Text and Pictures may inspire you to try
your own special Home-Brewed Loop Antrenna; or
other Shortwave Listening Do-It-Yourself Project )


iane ~ RHF