LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #1   Report Post  
Old December 3rd 05, 10:27 PM posted to rec.radio.shortwave
RHF
 
Posts: n/a
Default FYI - Two New and Different Loop Antenna Designs by W1VLF

For One and All,

AM/MW/BCB Loop Antenna
for DX MW LF VLF *No Tuning* - by W1VLF
http://cgi.ebay.com/_W0QQitemZ5835229011
Highlights - Here is an very low impedance Loop Antenna,
constructed of 1/2" copper piping, 24" on a side, with a
Broadband Impedance Transformer, and a 20 db Gain
Low Noise, High Dynamic Range Pre-Amplifier. The
output is a common UHF type SO 239 female connector.

WWVB 60 kHZ Ferrite Loop Active Antenna - by W1VLF
http://cgi.ebay.com/_W0QQitemZ5837399066
Highlights - The Antenna is 3 Ferrite Rods formed together
and wound with number 21 AWG Wire. There is a
Pre-Amplifier inside the base of the Antenna, and it is
powered up the Coax.

W1VLF = Paul Cianciolo
[ Vanagon = Rescue Electronics Surplus ]
http://stores.ebay.com/RESCUE-ELECTRONIC-SURPLUS

Hope the Text and Pictures may inspire you to try
your own special Home-Brewed Loop Antrenna; or
other Shortwave Listening Do-It-Yourself Project )


iane ~ RHF
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT +1. The time now is 10:51 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017